210th ECS Meeting - Cancun, Mexico

October 29 - November 03, 2006

PROGRAM INFORMATION
 

D4 - Critical Factors in Localized Corrosion 5, a Symposium in Honor of Hugh S. Isaacs

Corrosion
 

Monday, October 30, 2006

Universal 1, 1st Floor, Expo Center

In-Situ Studies of Localized Corrosion and Oxidation

Co-Chairs: N. Missert and S. Virtanen
TimeAbs#Title and Authors
10:00 Introductory Remarks (10 Minutes)
10:10 849 In Situ Corrosion Studies:Tracing Interconnecting Threads H. S. Isaacs (Brookhaven National Laboratory)
10:40 850 A Study on Thermal Formation and Electrochemical Reduction of Copper Oxide using Difference Viewer Imaging Technique R. Huang (University of Virginia), C. Lin (Xiamen University), R. Lillard (Los Alamos National Lab) and H. S. Isaacs (Brookhaven National Laboratory)
11:00 851 pH Mapping of Localized Corrosion in Confined Electrolyte by Fluorescence Microscopy R. Oltra (CNRS), F. Loete (CNRS - Universite de Bourgogne) and B. Vuillemin (CNRS Universite de Bourgogne)
11:20 852 Electrochemical Characterization of Submicrometer Structures T. Suter and O. von Trzebiatowski (EMPA)
11:40 853 In Situ Investigation of the Passive Films Formed on Chromium in Aqueous (pH8.4) Borate Buffer and Aqueous Chloride Solutions T. M. Devine (University of California) and F. Wang (University of California, Berkeley)
 
Co-Chairs: M. Ryan
TimeAbs#Title and Authors
14:00 854 Initial Stages of the Formation of Anodic Oxide on Co(0001) and its Reduction in Alkaline Solution Studied by XPS and STM H. Strehblow (Heinrich-Heine Universitaet) and A. Foelske (Heinrich-Heine-Universitaet)
14:20 855 The Influence of Impurities in Alpha-Uranium on Hydrogen Reaction Kinetics Using in Situ EC-STM R. Lillard (Los Alamos National Lab), M. Paffett and M. Hawley (Los Alamos National Laboratory)
14:40 856 The Role of Chloride in Al Oxide Surface Transformations and Pitting -An AFM Study N. Vasiljevic, R. G. Copeland and N. A. Missert (Sandia National Laboratories)
15:00 Intermission (20 Minutes)
 

Pitting Mechanisms in Stainless Steels - Nucleation, Prediction and Microstructural Effects

Co-Chairs: A. Davenport
TimeAbs#Title and Authors
15:20 857 Passivity Breakdown and the Evolution of Localized Corrosion Damage on Type 316L Stainless Steel D. D. Macdonald and S. Yang (Pennsylvania State University)
15:40 858 Effect of the Metallurgical Parameters on the Relevant Electrochemical Criterion for Localized Corrosion Resistance of Stainless Steels B. Baroux (Institut National Polytechnique de Grenoble) and B. Malki (LTPCM/GEDAI/ENSEEG)
16:00 859 Influence of Cold Working on the Pitting Corrosion Resistance of Stainless Steels L. Peguet (UGINE&ALZ Research Center (Arcelor)), B. Malki (LTPCM/GEDAI/ENSEEG) and B. Baroux (Institut National Polytechnique de Grenoble)
16:20 860 Local Mechanical-Electrochemical Behaviour of Duplex Stainless Steels : a Novel Approach for Mapping Precursor Sites for Pitting Corrosion V. Vignal (CNRS-Université de Bourgogne), O. Delrue (Universite de Bourgogne), R. Oltra (CNRS) and J. Peultier (Arcelor)
16:40 861 Coupled Multi-Electrode Investigation of Crevice Corrosion of 316 Stainless Steel and NiCrMo Alloy 625 F. Bocher, F. J. Presuel-Moreno and J. Scully (University of Virginia)
 

Tuesday, October 31, 2006

Universal 1, 1st Floor, Expo Center

Inhibitors and Coatings for Aluminum Alloys

Co-Chairs: M. Kendig and G. Frankel
TimeAbs#Title and Authors
08:00 862 Inhibition of AA2024-T3 Corrosion by Vanadates G. Frankel, M. Iannuzzi and G. Frankel (Ohio State University)
08:30 863 The Effect of Borate on Cerium Film Formation A. J. Aldykiewicz (W.R. Grace), A. J. Davenport (University of Birmingham) and H. S. Isaacs (Brookhaven National Laboratory)
09:00 864 High Silica Zeolite (ZSM-5) Coated Aluminum (Al-2024-T3): Micro-Structural Characterization by Laser Confocal Microscopy and Electrochemical Studies R. A. Munoz (University of California, Riverside), D. Beving (University of California) and Y. Yan (University of California, Riverside)
09:20 865 Corrosion Protection Due to Bacteria /Metal Interactions E. Kus, K. Nealson and F. Mansfeld (University of Southern California)
09:40 Intermission (20 Minutes)
10:00 866 Simplified Analysis of EIS for A Conversion Coated Aluminum Undergoing Pitting M. W. Kendig and M. W. Kendig (Teledyne Scientific Company)
 

Intergranular Corrosion and Hydrogen Absorption

Co-Chairs: S. Fujimoto and K. Nisancioglu
TimeAbs#Title and Authors
10:30 867 Effect of Heat Treatment on Grain Boundary Nanostructure and Corrosion of Low Copper AlMgSi Alloy K. Nisancioglu, M. Larsen (Norwegian University of Science and Technology), J. C. Walmsley and O. Lunder (SINTEF)
10:50 868 In Situ, Three Dimensional Quantification of Intergranular Corrosion Rates for Aluminium Alloys and Stainless Steels B. Connolly, D. Horner, S. Fox, A. J. Davenport, S. Ghosh, C. Padovani (University of Birmingham), M. Stampanoni, A. Groso (Paul Scherrer Institut), F. De Carlo and X. Xiao (Advanced Photon Source - Argonne National Lab)
11:10 869 Surface Processes Accompanying Corrosion-Induced Hydrogen Absorption into Aluminum S. Adhikari, K. Hebert (Iowa State University) and J. Lee (University of Illinois)
11:30 870 Degradation of Mechanical Strength of Al Alloys by Electrochemically Introduced Hydrogen S. Fujimoto, T. Kouno, T. Tsuji (Osaka University) and T. Haruna (Kansai University)
 

Corrosion Division Award Lectures

Co-Chairs: R. Kelly
TimeAbs#Title and Authors
14:00 871 Understanding Localized Corrosion through Electrochemical Measurements G. T. Burstein (University of Cambridge)
14:30 872 Semiconductive Nature of Passive Films on Fe-Cr Alloys H. Tsuchiya and S. Fujimoto (Osaka University)
15:00 Intermission (20 Minutes)
 

Pitting Corrosion in Aluminum and Aluminum Alloys - Stability, Nanostructure and Copper Redistribution

Co-Chairs: N. Missert and Zavadil
TimeAbs#Title and Authors
15:20 873 Influence of Specimen Area on the Pitting Probability of Aluminum Revisited - With a Special Reference to Aluminum Bonding Pad in Electronic Devices Y. Ishikawa (Yokohama National University) and T. Ozaki (Independent consultant)
15:50 874 Pit Stability Criteria for Aluminum and Implications for the Mechanism of Tunneling Corrosion A. B. Cook, S. Lyon, N. Stevens (University of Manchester), N. Laycock, S. White (Industrial Research Limited) and R. Newman (University of Toronto)
16:10 875 Programming Void Populations in the Passive Oxide of Aluminum in an Attempt to Correlate Evolving Nanostructure with Passivity Loss K. R. Zavadil, P. Kotula and T. Ohlhausen (Sandia National Laboratories)
16:30 876 Small Length-Scale Dissolution Phenomena in Al-Cu-X Alloys R. G. Buchheit and M. Cavanaugh (Fontana Corrosion Center)
16:50 877 Following Corrosion-Driven Relocation of Electrically-Connected Copper on AA2024 using Electrogenerated Chemiluminescence (ECL) Imaging H. N. Mcmurray (University of Wales Swansea) and Z. Barrett (Airbus UK)
17:10 878 Dissolution Characteristics of Al2Cu and Al-4Cu Thin Films N. A. Missert (Sandia National Laboratories), H. S. Isaacs (Brookhaven National Laboratory), G. Copeland (Sandia National Laboratories), B. Ingham (Industrial Research Limited), R. Huang (University of Virginia) and N. Vasiljevic (Sandia National Laboratories)
 

Universal Ballroom, 2nd Floor, Expo Center

Tuesday Evening Poster Session

Co-Chairs: M. Ryan
TimeAbs#Title and Authors
o 879 Fe-Cr Alloying for Iron Surface Modification by Nonsymmetric Alternating Pulsed Electrolysis S. Yagi, K. Murase (Kyoto University), T. Hirato (Tohoku University) and Y. Awakura (Kyoto University)
o 880 Corrosion Initiation and Anodic-Cathodic Alternation of Localized Corrosion of SiC-Reinforced Aluminum Composites in NaCl Solution H. Ding (University of Hawaii at Manoa) and L. H. Hihara (University of Hawaii)
o 881 Simple Fabrication of a Silver Epoxy Coated Microelectrode for SECM Imaging in Small Volumes L. F. Díaz-Ballote (CINVESTAV MERIDA) and D. O. Wipf (Mississippi State University)
o 882 Initiation of Localized Corrosion of Iron Investigated by Wavelet Transformation with Channel Flow Electrode M. Itagaki, D. Nakajima, I. Shitanda, K. Watanabe (Tokyo University of Science), T. Nukaga and F. Umemura (Tokyo Electric Power Company)
o 883 Crevice Corrosion of Ni-Cr-Mo Alloys P. Jakupi, D. Zagidulin (University of Western Ontario), J. Noël (The Universtiy of Western Ontario) and D. Shoesmtih (The University of Western Ontario)
o 884 Effect of Nickel on Metastable Pitting of Stainless Steels: Computer Simulations Study B. Malki (LTPCM/GEDAI/ENSEEG) and B. Baroux (Institut National Polytechnique de Grenoble)
o 885 Electrochemical Testing of Exfoliation Corrosion Sensitivity of Aluminum Alloys B. Malki (LTPCM/GEDAI/ENSEEG), B. Baroux (Institut National Polytechnique de Grenoble), T. Marlaud and A. Deschamps (LTPCM/GEDAI/ENSEEG)
o 886 Electrochemical Investigation of Localized CO2 Corrosion Mechanisms J. Han, Y. Yang, B. Brown and S. Nesic (Institute for Corrosion and Multiphase Technology)
o 887 Measurements of the Localized Dissolution Rate During Potentiostatic Generation of Corrosion Pits in Austenitic Stainless Steel in Natural Seawater J. A. Gonzalez-Sanchez (UNIVERSIDAD AUTÓNOMA DE CAMPECHE) and L. Dzib-Pérez (Universidad Autónoma de Campeche)
o 888 Copper Local Corrosion Under Joint Presence of Beta-Alanine and Nitrate-Ions in Alkaline Solutions S. A. Kaluzhina and V. Minakova (Voronezh State University)
o 889 Effects of High Salt Concentration on General CO2 Corrosion H. Fang, S. Nesic (Institute for Corrosion and Multiphase Technology) and S. Wang (Champion Technologies)
o 890 SRET Evaluation of the Corrosion Behavior of Thixocast AZ91 Magnesium Alloy in Dilute NaCl Solution at Room Temperature S. Jin, E. Ghali (Laval University), C. Blawert and W. Dietzel (GKSS Research Center)
o 891 A Hybrid Scanning Probe Technique for In Situ Imaging Surface Topography and Corrosion Potential of Localized Corrosions C. Lin, Y. Li and X. Zhuo (Xiamen University)
o 892 Diagnosis of Steel Corrosion in Fresh Water by Using Mahalanobis Distance M. Itagaki, M. Itagaki, E. Takamiya, I. Shitanda, K. Watanabe (Tokyo University of Science), T. Nukaga and F. Umemura (Tokyo Electric Power Company)
o 893 Determination of the Diffusivity of Cation Vacancy in the Passive Film on Ni H. Kwon (Korea Advanced Institute of Science and Technology), H. Jang (Korea Institute of Science and Technology) and S. Ahn (Korea Institute of Energy Research)
o 894 Examination of Corrosion Products and the Alloy Surface after Crevice Corrosion of a Ni-Cr-Mo Alloy X. Shan (Case Western Reserve University) and J. H. Payer (Case Western Reserve)
o 895 Aluminum Aloy 6061 Galvanic Corrosion, Pitts Grown and Passivation in Artificial Seawater Solution. II System Modeling A. Pikelny (WEHO) and D. DeFranco (L-3 Communications, Ocean Systems)
o 896 Crevice Corrosion Current and Potential Oscillations Analysis at Open Circuit T. Souier, B. Malki (LTPCM/GEDAI/ENSEEG) and B. Baroux (Institut National Polytechnique de Grenoble)
o 897 Predictive Model for Cut-Edge Corrosion of Galvanized Steels R. Oltra (CNRS), B. Vuillemin, F. Thebault (CNRS Universite de Bourgogne), A. Christian (ARCELOR), F. Dosdat (ARCLEOR) and K. Ogle (ENSC Paris)
o 898 Effects of Sliding Wear at Various Loading Conditions on the Local Mechanical-Electrochemical Behaviour of Duplex Stainless Steels H. Krawiec (AGH-University of Science and Technology), V. Vignal (CNRS-Université de Bourgogne), P. Ponthiaux and F. Wenger (Ecole Centrale Paris)
o 899 Corrosion Current Fluctuations at Metastable to Stable Pitting Transition of Aluminum B. Malki (LTPCM/GEDAI/ENSEEG) and B. Baroux (Institut National Polytechnique de Grenoble)
 

Wednesday, November 1, 2006

Universal 1, 1st Floor, Expo Center

Porous Anodic Films

Co-Chairs: S. Virtanen
TimeAbs#Title and Authors
08:00 900 From Random Pits to Synchronized Pores P. Schmuki and P. Schmuki (University of Erlangen)
08:30 901 Nanotube Arrays of TiO2 Formed by Anodic Processes B. Smyrl (Univ of Minnesota) and M. Alhoshan (University of Minnesota)
08:50 902 Anodic Oxide Nanotubes on Biomedical Ti Alloys H. Tsuchiya (Osaka University), J. Macak, A. Ghicov (University of Erlangen-Nuremberg) and P. Schmuki (University of Erlangen)
09:10 903 Microstructure and Corrosion Resistance of Anodic Films Formed on Magnesium S. Ono (Kogakuin University, Faculty of Engineering), A. Suzuki and H. Asoh (Kogakuin University)
09:30 904 Model for the Steady-State Growth of Porous Anodic Alumina Films J. E. Houser and K. Hebert (Iowa State University)
09:50 Intermission (20 Minutes)
 

Corrosion of Mg and Mg Alloys

Co-Chairs: P. Schmuki
TimeAbs#Title and Authors
10:10 905 Passivity and Localized Corrosion of Magnesium Alloys A. J. Davenport, M. Gonzalez-Torreira, A. Fones, C. Padovani, B. Connolly (University of Birmingham), N. Stevens, T. Beale (University of Manchester), M. Stampanoni and A. Groso (Paul Scherrer Institut)
10:30 906 Localized Corrosion of Magnesium-Yttrium-Titanium Thin-Film Alloys B. A. Shaw (Penn State University) and E. Sikora (The Pennsylvanis State University)
10:50 907 Localized Corrosion of Magnesium in Chloride Containing Electrolyte Studied by a Scanning Vibrating Electrode Technique G. Williams and H. N. Mcmurray (University of Wales Swansea)
11:10 908 Influence of Simulated Biological Solutions on the Corrosion Behavior of an Mg Alloy S. Virtanen and R. Rettig (University of Erlangen-Nuremberg)
 

Corrosion Resistant Alloys-Kinetics,Crevice Corrosion and Passivity

Co-Chairs: J. Payer and R. Kelly
TimeAbs#Title and Authors
14:00 909 Kinetic Studies of Localized Corrosion Using the Artificial Pit Electrode R. Newman, A. Carcea and D. He (University of Toronto)
14:30 910 Kinetic Stability Diagrams D. D. Macdonald (Pennsylvania State University)
14:50 911 Kinetics of Cathodic Reduction of Oxygen on Ni-Cr-Mo-W Alloy D. Zagidulin, B. Sherar, P. Jakupi, J. J. Noel and D. W. Shoesmith (University of Western Ontario)
15:10 912 Oxygen Electroreduction on Ni-Cr-Mo Alloys S. P. Rogers, D. F. Gervasio (Arizona State University) and J. H. Payer (Case Western Reserve)
15:30 913 Quantitative Analyses of the Severity of Attack on Crevice Corrosion Samples with Rigorously Controlled Crevice Dimensions A. J. Hodges and R. G. Kelly (University of Virginia)
15:50 Intermission (20 Minutes)
16:10 914 Modeling of Crevice Corrosion Stability and Stifling of a NiCrMo Alloy and Stainless Steel F. J. Presuel-Moreno, F. Bocher, J. Scully and R. G. Kelly (University of Virginia)
16:30 915 Modeling the Effects of Crevice Former, Particulates, and the Evolving Surface Profile in Crevice Corrosion U. Landau, A. S. Agarwal, X. Shan (Case Western Reserve University) and J. H. Payer (Case Western Reserve)
16:50 916 Effect of Soaking in Hot Saline Solutions and Humid Atmospheres on the Passive Film Behavior of a Ni-Cr-Mo Alloy P. Pharkya and J. H. Payer (Case Western Reserve University)
17:10 917 Corrosion Resistances of Iron-Based Amorphous Metals with Yttrium and Tungsten Additions in Hot Calcium Chloride Brine J. C. Farmer (Lawrence Livermore National Laboratory), S. D. Day, J. J. Haslam (LLNL) and N. Yang (Sandia)
 

Thursday, November 2, 2006

Universal 1, 1st Floor, Expo Center

Dealloying

Co-Chairs: S. Virtanen
TimeAbs#Title and Authors
08:30 918 Insights into the Parting Limit for De-Alloying from Reconsideration of Atomistic Considerations R. Newman, D. Artymowicz (University of Toronto) and K. Sieradzki (Arizona State University)
08:50 919 Further Insights Into the Dealloying Critical Potential: Effect of Electrolyte Composition B. D. Eichelberger and S. Corcoran (Virginia Tech)
 

Passive Film Thickness Effects

TimeAbs#Title and Authors
09:10 920 The Influence of Irradiated Defect Structures on the Corrosion Behaviour of Nickel O. von Trzebiatowski, T. Suter (EMPA) and S. Virtanen (University of Erlangen-Nuremberg)
09:30 921 The Nature and Thiknesses of Passive Films on Interface Cu/ NaOH+Alanine E. V. Orlova (Voronezh State University) and N. Andreeva (Institute of Physical Chemistry)
09:50 Intermission (20 Minutes)
 

Novel Techniques

Co-Chairs: R. Newman and J. Scully
TimeAbs#Title and Authors
10:10 922 Use of Coupled Multi-Electrode Arrays to Elucidate Propensity for Copper Pipe Pitting as a Function of Potable Water Chemistry H. Cong, N. D. Budiansky (University of Virginia), H. Michels (Copper Developmnet Association Inc.) and J. Scully (University of Virginia)
10:30 923 Imaging Localized Corrosion via AC-SECM and SECM-Integrated Stripping Voltammetry A. Schulte (The University of the West Indies), D. Ruhlig, T. Erichsen (Ruhr Universitaet Bochum) and W. W. Schuhmann (Ruhr-Universität Bochum)
10:50 924 Studies of Electron Transfer at Aluminum and Aluminum Alloy Surfaces by Scanning Electrochemical Microscopy D. E. Tallman (North Dakota State University), M. Jensen (Concordia College), T. Bjordahl and G. Bierwagen (North Dakota State University)
11:10 925 Microgalvanic Coupling on Aluminium Alloys: Towards a Local Electrochemical Approach R. Oltra (CNRS), N. Murer (CNRS - Universite de Bourgogne), V. Vignal (CNRS-Université de Bourgogne), B. Vuillemin (CNRS Universite de Bourgogne), M. Benmalek and P. Litalien (ALCAN CRV)
11:30 926 Effect of Mg Alloying Addition on Dissolution Behavior of Oxide Films in Al-Si-Mg Alloys M. A. Pech-Canul (CINVESTAV-MERIDA), M. Pech-Canul (CINVESTAV-Saltillo) and M. Echeverría (CINVESTAV-Merida)
 

Impedance

Co-Chairs: F. Martin
TimeAbs#Title and Authors
14:00 927 Comparison of the Electrochemical Behavior of Pure Al and Al 2024-T3 Alloy in Low Concentrated Chloride Media H. G. de Melo (São Paulo University), N. Pébère (CIRIMAT/UMR - ENSIACET) and L. Morales Palomino (São Paulo University)
14:20 928 Influence of pH, H2S and Ferrous Ions on Localized Corrosion of Iron by Sulfate-Reducing Bacteria L. A. Ocando, M. de Romero (Universidad del Zulia), O. De Rincón (universidad del zulia, Centro de estudios de corrosion), O. Perez, E. Leon and L. Atencio (Universidad del Zulia)
14:40 929 The Apparent CPE Behavior of a Disk Electrode with Faradaic Reactions M. E. Orazem, V. Huang (University of Florida), V. Vivier (LISE (CNRS)), B. Tribollet (LISE-CNRS) and N. Pebere (CIRIMAT)
15:00 Intermission (20 Minutes)
 

Microstructural Effects and Corrosion Resistant Coatings for Steels and Iron

Co-Chairs: F. Martin and C. Jeffcoate
TimeAbs#Title and Authors
15:20 930 Corrosion of the Braze Affected Zone in Stainless Steel C. Jeffcoate and M. Pohlman (Honeywell International)
15:40 931 The Effect of Magnesium Additions on the Microstructure and Cut Edge Corrosion Resistance of Zinc Aluminum Alloy Galvanized Steel D. A. Worsley (Swansea University) and J. Elvins (Corus)
16:00 932 Localized Corrosion Resistance of LTCSS-Carburized Materials to Seawater Immersion F. J. Martin (SAIC), E. Lemieux (U. S. Naval Research Laboratory), T. Newbauer (SAIC/NRL Operations), R. Bayles, P. Natishan (U. S. Naval Research Laboratory), H. Khan, F. Ernst and A. Heuer (Case Western Reserve University)
16:20 933 Macroscopic and Local Electrochemical Studies of Austempered Ductile Iron in Various Aqueous Solutions H. Krawiec (AGH-University of Science and Technology), V. Vignal (CNRS-Université de Bourgogne) and J. Banaś (AGH-University of Science and Technolgy)
16:40 934 Localized Corrosion of Chromium Coated Steel X. Zhang (Netherlands Institute for Metals Research), P. Beentjes (Corus Group), A. M. Mol (TU Delft), H. Terryn (Vrije Universiteit Brussel) and J. de Wit (Delft University of Technology, The Netherlands)
17:00 935 Electrochemical Behavior of AF1410 High-Strength Secondary Hardening Steel with/without Cd plating Y. Yoon and D. C. Hansen (University of Dayton Research Institute)