217th ECS Meeting - Vancouver, Canada

April 25 - April 30, 2010

PROGRAM INFORMATION
 

D1 - Corrosion General Session

Corrosion
 

Tuesday, April 27, 2010

Exhibit and Poster Hall, Conference Floor, Fairmont

General Corrosion Poster Session

Co-Chairs: A. Alfantazi and D.C.Hansen
TimeAbs#Title and Authors
o   844   A Green Pathways: Investigation of Corrosion Inhibitors and Inhibitive Effect of Some Novel Organic Dyes on the Corrosion of 2S Aluminum in Alkaline Media P. K. Patel (M.G. Science Institute)
o   845   The Explaining and Analysis of Metal Passivation with Electron Theory L. Li (Naval University of Engineering)
o   846   Study of Corrosion Behavior of Ni-Cu-P- Nano Al2O3 Electroless Composite Coatings by EN Method and Comparison with EIS and Polarization Results H. Ashassi-Sorkhabi and H. Aminikia (University of Tabriz)
o   847   Corrosion Inhibitory Effects of a New Synthetic Symmetrical Schiff-Base on Mild Steel In 1.0M HCl And 0.5M H2SO4 Media A. Dadgarinezhad and F. Baghaei Ravari (Shahid Bahonaar University)
o   848   Inhibition of Aluminum Corrosion in 0.5 MH2SO4 Using the Propargyl Alcohol F. Baghaei Ravari and A. Dadgarinezhad (Shahid Bahonaar University)
o   849   Synergistic Effect of Different Salts on the Inhibition Efficiency of a Cationic Surfactant on Steel Corrosion in Acid Medium D. Asefi (Azad University South Branch of Tehran), M. Arami (Amir Kabir University of Technology) and N. Mahmoodi (Institute for Colorants, Paint and Coatings)
o   850   Corrosion Inhibition of Titanium in Acidic Media Containing Fluoride with Bixin J. S. Chauhan (SIRT) and D. Gupta (M.V.M.Bhopal)
o   851   Decision of Corrosion Protection Potential for FSWed Dissimilar Aluminum Alloy via Slow Strain Rate Test S. Kim, J. Park, M. Han and S. Jang (Mokpo Maritime University)
o   852   Anodic Behavior of Iron in Hydrocarbonate Media with Addition of Nitrate- and Sulphate-Ions in Different Thermal Conditions S. Kaluzhina (Voronezh State University), N. Nafikova (Voronezh State Technological Academy) and N. Lapunina (Voronezh State University)
o   853   Compute of the Diffusion Coefficient to the Alloy Fe - Ni, Using the Radless-Sevsik Correlation, in Basic NaOH Solutions Environment B. Martínez (Instituto Politecnico Nacional ESIQIE), A. Oropeza (ESIQIE IPN) and C. Martínez (Instituto Mexicano del Petroleo)
o   854   Formation of Anodic Oxidation Films on As-Cast Surface of AC2A Casting Al Alloy S. Moon, C. Yang and Y. Jeong (Korea Institute of Materials Science)
o   855   Modeling of Corrosion Resistance of Some Titanium Base Alloy in Aggressive Environments M. V. Popa, E. Vasilescu, P. Drob, C. Vasilescu, S. I. Drob (Institute of Physical Chemistry) and J. Mirza Rosca (Las Palmas de Gran Canaria University)
o   856   Corrosion Resistance of a New Bioalloy in Physiological Fluids M. V. Popa, E. Vasilescu, P. Drob, C. Vasilescu, S. I. Drob (Institute of Physical Chemistry) and M. Popa (S.C. Dentestetics S.R.L.)
o   857   Studies on the Stability of Zn and Zn-TiO2 Nanocomposite Coatings Prepared by Pulse Reverse Current A. Gomes, T. Frade (CCMM) and M. Da Silva Pereira (Universidade de Lisboa)
o   858   High Temperature Corrosion Study for T22 Alloy Applying Electrochemical Techniques C. Cuevas-Arteaga (Morelos State University)
o   859   Deposition and Characterization of Corrosion-Resistant Amorphous Chromium Carbide Thin Films J. E. Högström, M. Hanson, S. Urbonaite, A. Furlan, W. Fredriksson, S. Franson, K. Edström, U. Jansson and L. Nyholm (Uppsala University)
o   860   Improved Boundary Effects in P-Type Macroporous Silicon S. Zhang, J. Jiao, D. Ge and Y. Wang (Shanghai Institute of Microsystem and Information Technology)
o   861   Potentiodynamic Study of Titanium in Manganese-Containing Sulphuric Acid Solution W. Utomo and S. Donne (University of Newcastle)
o   862   The Synthesis and CMP Application of Ceria Powder C. Hsu, S. Chen (Feng Chia University), M. Tsai and M. Tsai (Southern Taiwan University)
o   863   Electronoptical Observations of Reanodized Film of Initial Porous Film Growth in 0.4 M Phosphoric Acid Electrolyte after Anodizing in Molten Melts S. Han, H. Kim, Y. Heo, G. Yoon (KITECH), J. Lee (KC Chemical Co., Ltd) and G. Thompson (UMIST)
o   864   Electronoptical Observations of Reanodized Film in 0.1 M Ammonium Pentaborate Electrolyte after Anodizing in Molten Melts S. Han, Y. Heo, G. Yoon, H. Kim (KITECH) and G. Thompson (UMIST)
o   865   Corrosion Inhibition of Aluminum by Organic Coatings Formulated with Hydrotalcite-Vanadate Pigments J. M. Vega, D. De la Fuente (CENIM/CSIC) and R. Buchheit (FCC/The Ohio State University)
o   866   The Electrochemical Corrosion of Nickel in Sodium Chloride-Sulfuric Acid Solutions at Different Concentration Ratios Using an Electrochemical Method B. Martínez, A. Oropeza (Instituto Politecnico Nacional ESIQIE) and C. Martínez (Instituto Mexicano del Petroleo)
o   867   Potential Distribution Study in a Metal/Coating System by SKP and FEM J. M. Vega, R. Montoya (CENIM/CSIC), V. Barranco (ICMM/CSIC) and D. De la Fuente (CENIM/CSIC)
o   868   Step Polarization Test of Implant Biomedical Alloy in Physiologic Solutions A. Igual Muñoz and C. Valero Vidal (Universidad Politécnica de Valencia)
o   869   Effects of Pre-Electrodeposition with Fe and Cu Before Annealing in Reducing Atmosphere on the Corrosion of Hot-Dip Galvanized and Galvannealed Steels Y. Choi, M. Cho and C. Park (Chonnam National University)
o   870   The Inhibitive Action of Some Polymeric Compounds on Mild Steels Corrosion in Cooling Waters Systems V. Branzoi (University Politehnica of Bucharest), F. Branzoi (Institute of Physical Chemistry) and L. Pilan (University Politehnica of Bucharest)
o   871   Characteristics on Hydrogen Embrittlement and Stress Corrosion Cracking with SSRT for STS 304 M. Han, S. Jang and S. Kim (Mokpo Maritime University)
o   872   Investigation on Corrosion Protection Potential by Electrochemical Experiment in Sea Water of 5052-O Al Alloy for Leisure Ship S. Kim, J. Park and S. Chong (Mokpo Maritime University)
o   873   Evaluation of Electrochemical Characteristics for FSWed Dissimilar Al Alloy (5052-O : 6061-T6) J. Park, M. Han and S. Kim (Mokpo Maritime University)
o   874   Spontaneous Grafting of Benzylphosphonic Acid on Steel Surface Through the Aryldiazonium Salt for Application in Corrosion Protection X. Le and D. Bélanger (Université du Québec à Montréal)
 

Wednesday, April 28, 2010

Regency D, 3rd Floor, Hyatt

General Aspects of Corrosion I

Co-Chairs: D.C. Hansen and A. Alfantazi
TimeAbs#Title and Authors
08:00   875   Corrosion Studies of Sump Operation for the Nuclear Power Plant Safety P. Mast, R. Choromokos and J. M. Park (Alion Science & Technology)
08:20   876   The Atmospheric Corrosion of Zinc: The Effects of Concentration, Droplet Size and Droplet Shape T. Muster (CSIRO Materials Science and Engineering), A. Bradbury, A. Trinchi, T. Markley, D. Lau, S. Dligatch, A. Bendavid and P. Martin (CSIRO Materials Science & Engineering)
08:40   877   Influence of Al and Hf Addition on the Oxidation Resistance of Nb-20Si-20Cr-5(Al, Hf) Alloys A. Vasquez, D. Alvarez and S. K. Varma (The University of Texas at El Paso)
09:00   878   Influence Of Environmental Factors on the Susceptibility to Stress Corrosion Cracking Of High-Strength Al-Zn-Mg Alloys H. Ali Jawan (University Of Al-Margep)
09:20   879   Acoustic Emission During Stress Corrosion Cracking of Aluminum Metal Matrix Composites Z. M. Gasem (King Fahd University of Petroleum and Minerals)
09:40   880   Performance of Alloy 625 under Combustion Gas Environments and Others Applications: A Review C. Cuevas-Arteaga (Morelos State University), D. Verhelst (Teck Metals Ltd.) and A. Alfantazi (University of British Columbia)
10:00 Intermission (20 Minutes)
10:20   881   Assessment of Corrosion Resistance and Biocompatibility of Ti-Ta and Ti-Ta-Cr Alloys P. S. Gill, N. Munroe, W. Haider, C. Pulletikurthi, S. Pandya and V. Tek (Florida International University)
 

General Aspects of Corrosion II

Co-Chairs: A. Fantazi and Z. Gasem
TimeAbs#Title and Authors
10:40   882   The Coefficient γ is the Quantitative Characteristic of the Activating or Inhibiting Properties of Inorganic Oxidizing Agent M. Reda (CanadElectrochim)
11:00   883   Effect of Current Density and Time on AC/DC Spark Anodization of Al-Cu Alloys E. A. Alsrayheen (University of Calgary), R. Rateick (Honeywell Aerospace) and V. I. Birss (University of Calgary)
 

Electrochemical Impedance Spectroscopy

Co-Chairs: D.C. Hansen and M.E. Orazem
TimeAbs#Title and Authors
11:20   884   On Time-Constant Distributions Associated with the Constant-Phase Element B. Hirschorn, M. E. Orazem (University of Florida), B. Tribollet, V. Vivier (Université Pierre et Marie Curie), I. Frateur (Ecole Nationale Supérieure de Chimie de Paris) and M. Musiani (Istituto per l'Energetica e le Interfasi)
11:40   885   EIS Study on the Corrosion Behavior of CuFeS2 Thin Film A. Ghahremaninezhad, E. Asselin and D. Dixon (University of British Columbia)
 

Corrosion in Aggregate Environments

Co-Chairs: Z. Gasem and E. Asselin
TimeAbs#Title and Authors
14:00   886   The Impact of Core-Shell Micelles on Steel Properties and Microstructural Characteristics in Reinforced Mortar after Corrosion and Cathodic Prevention D. Koleva, J. Hu, K. Van Breugel (Delft University of Technology) and N. Boshkov (BAS-BG)
14:20   887   Hybrid Composite Aggregates for Superior Corrosion Performance of Low-Carbon Steel in Model Solutions D. Koleva, J. Hu, K. Van Breugel (Delft University of Technology), N. Boshkov, T. Radeva and V. Milkova (BAS-BG)
14:40   888   Preliminary Study on the Self-Healing of Steel, Resulting from the Presence of Nano-Aggregates in Cement Extract J. Hu, D. Koleva, K. Van Breugel (Delft University of Technology) and P. Petrov (Bulgarian Academy of Sciences)
15:00 Intermission (20 Minutes)
 

Corrosion Modeling and Passivity

Co-Chairs: E. Asselin and A. Alfantazi
TimeAbs#Title and Authors
15:20   889   The Bi-Layer Point Defect Model for Passive Films D. Macdonald (Penn State University) and G. Englehardt (OLI Systems, Inc.)
15:40   890   Location and Estimation of Oxygen Reduction Reaction on a Corroding Metal Surface Covered with Metal Oxide: A Porous Electrode Model M. S. Venkatraman, I. S. Cole (CSIRO) and B. Emmanuel (Central Electrochemical Research Institute)
16:00   891   New Scientific Definition of the Phenomenon of Passivity M. Reda (CanadElectrochim)
16:20   892   The Role of Alumina in Aluminum Corrosion and Passivation J. Skrovan (King Fahd University of Petroleum & Minerals), A. Alfantazi and T. Troczynski (University of British Columbia)
 

General Aspects of Corrosion III

Co-Chairs: A. Alfantazi and D.C. Hansen
TimeAbs#Title and Authors
16:40   893   Influence of Microstructure on Corrosion Performance of Cu-Lean 7003 Aluminum Alloy Extrusions C. Krishnan and J. Kish (McMaster University)
17:00   894   Ferromagnetic CoPt3 Nanowires Using a Porous Anodic Alumina Template R. Liu (National Taiwan University)
17:20   895   High Temperature Corrosion of 625 Superalloy under Iron-Zinc Oxide/Lead Sulfate Salt Mixture E. Mohammadi Zahrani, A. Alfantazi (University of British Columbia) and D. Verhelst (Teck Metals Ltd.)
17:40   896   Effect of Particle Angular Velocity on Erosion Enhanced Corrosion of 304 Stainless Steel F. Mohammadi and J. Luo (University of Alberta)
 

Thursday, April 29, 2010

Regency D, 3rd Floor, Hyatt

Conversion Coatings

Co-Chairs: A. Alfantazi and V.J. Gelling
TimeAbs#Title and Authors
08:00   897   Corrosion Protection Mechanisms of Cerium-Based Conversion Coatings on Aluminum Alloys W. Pinc, S. Maddela, W. Fahrenholtz and M. O'Keefe (Missouri University of Science and Technology)
08:20   898   Acid Pickling Treatments to Enhance the Performance of Cerium Conversion Coating on AZ31 Magnesium Alloys H. Su, Y. Huang (National Taiwan University), W. Li (Industrial Technology Research Institute of Taiwan) and C. Lin (National Taiwan University)
08:40   899   Directly Deposited CePO4 Coatings for the Corrosion Protection of Al 2024-T3 D. K. Heller, W. Fahrenholtz, M. O'Keefe (Missouri University of Science and Technology) and G. Fair (WPAFB AFRL/RXLN)
09:00   900   Effect of Humidity on Cerium Based Conversion Coatings S. Joshi, W. Fahrenholtz and M. O'Keefe (Missouri University of Science and Technology)
09:20   901   Characterization of Transport Processes in a Praseodymium-Based Coating B. L. Treu, W. Pinc, W. Fahrenholtz, M. O'Keefe (Missouri University of Science and Technology), E. Morris and R. Albers (Deft Inc.)
09:40   902   Electrochemical Analysis of a Polypyrrole/Aluminum Flake Composite Pigment: The Influence of the Dopant C. Vetter, M. Yan (North Dakota State University), S. Hoge (Purdue) and V. J. Gelling (North Dakota State University)
10:00 Intermission (20 Minutes)
 

Coating Performance

Co-Chairs: V.J. Gelling and H.G. Wheat
TimeAbs#Title and Authors
10:20   903   Coatings for Early Corrosion Detection H. G. Wheat and G. Liu (University of Texas at Austin)
10:40   904   The Electrochemical Polarization and Galvanic Couple Behavior of the Primary Phase of 55% Al-Zn Coating T. A. Lowe, G. Wallace (University of Wollongong) and A. Neufeld (BlueScope Steel)
11:00   905   Investigation of the Corrosion Barrier Properties of Multilayer Oxides by High Throughput Electrochemical Screening T. Muster (CSIRO Materials Science and Engineering), S. Dligatch, T. Markley, P. Martin, A. Bendavid, D. Lau, A. Trinchi and A. Bradbury (CSIRO Materials Science & Engineering)
 

Coatings by Various Application Techniques

Co-Chairs: H.G. Wheat and D.C. Hansen
TimeAbs#Title and Authors
14:00   906   Corrosion Protection for 316 Stainless Steel Using Nanoporous, Nanoparticulate Thin-Films Oxide Coatings M. Tejedor (University of Wisconsin, Madison) and M. Anderson (University of Wisconsin-Madison)
14:20   907   Electrodeposited Ni-Al2O3 Composite Coatings from Supercritical Carbon Dioxide Fluid S. Chung, S. Chiu and W. Tsai (National Cheng Kung University)
14:40   908   Microstructures and Corrosion Properties of Multilayered TiAlN/SiNx Coatings Y. Chan and J. Duh (National Tsing-Hua University)
15:00 Intermission (20 Minutes)
15:20   909   Review of Studies on Corrosion of Electrodeposited Nanocrystalline Metals and Alloys N. Nik Masdek (UBC) and A. Alfantazi (University of British Columbia)
15:40   910   Corrosion Protection of Steel by Al-Mg Plasma Spray Coating Y. Takeyoshi (Kyushu Electric Power Co., Inc.), S. Takase, Y. Shimizu (Kyushu Institute of Technology), M. Sueyoshi and Y. Uchida (Kyushu Electric Power Co., Inc.)
16:00   911   The Effect of Copper Undercoat on the Corrosion and Wear Resistance of a Cr-C Deposit Electroplated from a Trivalent Chromium-Based Bath Y. Liu, S. Hsu, C. Chuang and C. Huang (Chang Gung University)
16:20   912   Improvement of Electrochemical Migration Resistance by Sn Coating on Cu Electrode in Printed Circuit Board M. Jung, S. Lee, H. Lee (Seoul National University), C. Ryu, Y. Ko, H. Min (Samsung Electro-Mechanics) and Y. Joo (Seoul National University)