2004 Joint International Meeting

October 3-October 8, 2004

PROGRAM INFORMATION

F2 - Corrosion in Marine and Saltwater Environments II

Corrosion

Sunday, October 3, 2004

Rainbow 1, Lower Level, Rainbow Tower

Corrosion and Testing of Materials in Saltwater Environments

Co-Chairs: T. Tsuru and T. Ohtsuka

TimeAbs#Title
13:00715 Corrosion of Potential Heat-Exchanger Materials in Singapore Seawater - D. Blackwood, Q. Liu (National University of Singapore), K. Fujita, and K. Oonishi (Sumitomo Chemical Co. Ltd.)
13:20716 Bilayered Photoanodes for Cathodic Protection of Copper - R. Subasri, T. Shinohara (National Institute for Materials Science), and K. Mori (Nihon Parkerizing Co. Ltd)
13:40717 Acid Dew Corrosion Behavior of Cu-Sb bearing Low Alloy Steel - A. Usami (Nippon Steel Corporation)
14:00718 The Mechanism of Chloride-Induced Filiform Corrosion on Iron Investigated by Time-Lapse Photomicrography - T. Watson, N. McMurray, G. Williams, and A. Coleman (University of Wales Swansea)
14:20719 Influence of Corrosion Environment on SCC Behavior of SUS304 in H2SO4-NaCl Aqueuos Solution - S. Sunada, A. Motozawa, and K. Majima (Department of Material Systems Engineering and Life Science, Faculty of Engineering, Toyama University)
14:40720 Improvement of Pitting Corrosion of Ti-Plasma Sprayed NiTi Shape Memory Alloy by Sealing Treatment - M. Okuyama, S. Take, and Y. Itoi (Oyama National College of Technology)
15:00 Twenty-Minute Intermission
15:20721 Inhibition of Corrosion-driven Coating Delamination on Zinc by Polyaniline Emeraldine salts - M. Loveridge, N. McMurray, and G. Williams (Materials Research Centre, University of Wales (Swansea))
15:40722 Evaluation of Corrosion Prevention Compounds and the Understanding of Their Function Inside Aircraft Lap Joints - F. Gui and R. Kelly (University of Virginia)
16:00723 Corrosion Behavior of Titanium Grade 7 in Fluoride-Containing NaCl Brines - T. Lian, M. Whalen, and L. Wong (Lawrence Livermore National Laboratory)
16:20724 Corrosion Properties of MoSi2-Si3N4 Nanocomposite in Acidic and Basic Aqueous Environments - P. Mohan, T. Du, S. Suryanarayana, and V. Desai (University of Central Florida)
16:40725 Corrosion Performance and Testing of Materials in Marine Environments - D. Shifler (Naval Surface Warfare Center)
17:00 Brief Oral Presentations for Poster Authors

Monday, October 4, 2004

Corrosion and Environmental Cracking of Aluminum

Co-Chairs: D. Shifler and T. Tsuru

TimeAbs#Title
10:00726 Imaging and Characterization of Multiple Stress Corrosion Cracks in AA2024-T3 by X-Ray Radiography - X. Liu, G. Frankel (Fontana Corrosion Center), B. Zoofan, and S. Rokhlin (Dept. of Industrial, Welding and Systems Eng.)
10:20727 Sensitization and Environmental Cracking of 5xxx Aluminum Marine Sheet and Plate Alloys - F. Bovard (Alcoa Technical Center)
10:40728 Assesment of Corrosion Behavior and Stress Corrosion Cracking Susceptibility of Nanocrystalline Bulk Al-Mg-Based Alloys in Chloride Containing Solutions - E. Sikora, B. Shaw, and M. Sharma-Judd (Penn State University)
11:00729 Micro-electrochemical Investigation Of The Deformed Surface Layer On Wrought Aluminium Alloy - P. Premendra (Delft University of Technology), L. Philippe, H. Terryn (Netherlands Institute for Metals Research (NIMR)), H. de Wit, and L. Katgerman (Delft University of Technology)
11:20730 Electrochemical Noise Study on Galvanic Corrosion of Anodized Aluminum in Chloride Environments - M. Sakairi, Y. Shimoyama, and H. Takahashi (Graduate School of Engineering, Hokkaido University)
11:40731 EN Evaluation of Commercial Epoxy Coatings Submitted to Multiple Thermal Immersion Ageing - M.E. Angeles San Martín and F.J. Rodríguez Gómez (National University of Mexico (UNAM))
12:00732 Design Criteria For Contolling Stress Corrosion Cracking (SCC) in a Marine Application - V.C. Madumere (TransCoastal Nigeria Limited)

Atmospheric Corrosion of Carbon Steel and other Alloys

Co-Chairs: P. Natishan and F. Martin

TimeAbs#Title
14:00733 Enhancement of Electric Conductivity of the Rust Layers on weathering Steels by Water Adsorption - T. Ohtsuka, T. Komatsu, and T. Sasaki (Hokkaido University)
14:30734 Atmospheric Corrosion Monitoring of Weathering Steels Using AC Impedance Technique - A. Nishikata, T. Kojima, and T. Tsuru (Tokyo Institute of Technology)
14:50735 Corrosion Monitoring in Marine Environments Using Electrochemical Impedance - M. Itagaki, M. Endo, K. Watanabe (Tokyo University of Science), H. Katayama, K. Noda, and H. Masuda (National Institute for Materials Science)
15:10736 KFM Observation of Atmospheric Corrosion on Low Alloy Steels near Seashore Environment - H. Masuda and H. Katayama (National Institute for Material Science)
15:30737 Effect of Thickness of Water Film on Corrosion Behavior of Carbon Steel@in Marine Atmosphere - T. Shinohara, Y. Hosoya (Materials Information Technology Station, National Institute for Materials Science), W. Oshikawa (College of Engineering, University of the Ryukyus), and S.-I. Motoda (Tokyo University of Marine Science and Technology)
15:50 Twenty-Minute Intermission
16:10738 Corrosion Behavior of Stainless Steels in Neutral and Acidified Sodium Chloride Solutions by Electrochemical Impedance Spectroscopy - L.M. Calle (NASA), M. Kolody, and R. Diaz (ASRC Aerospace Corporation)
16:30739 Carbon Steel Corrosion Kinetic in Sodium Chloride Dynamic Solutions Surroundings Including Application to the Galvanochemical Process - A. Pikelny (WHCH) and O. Pikelnaya (UCLA)
16:50740 Corrosion protection mechanism of the advanced weathering steel (Fe-3.0Ni-0.40Cu) in a coastal area - M. Kimura, H. Kihira (Nippon Steel Corp.), M. Nomura, and Y. Kitajima (Photon Factory)
17:10741 Application of AC Impedance Method to Atmospheric Corrosion Monitoring of Low Alloy Steels - H. Katayama, A. Tahara, K. Noda, and H. Masuda (National Institute for Materials Science)
17:30742 Short term Predictive testing for Cut Edge Corrosion Resistance in Zinc - Aluminium Alloy Galvanised Steels - J. Elvins, J. Sullivan, J. Spittle, and D. Worsley (University of Wales, Swansea)
17:50743 Electrochemical Impedance Spectroscopy Evaluation of the Skin and Bulk Corrosion Behavior of Die-cast and Thixo-cast AZ91D Alloy in 5% (0.885 M) Sodium Chloride Solution - S. Jin, N. Giguere, D. Dube, R. Tremblay, and E. Ghali (Laval University)

Tuesday, October 5, 2004

Corrosion Prediction, Corrosion , and Inhibition of Ni-base Alloys Factors Contributing to Corrosion of Aluminum Materials

Co-Chairs: S. Ito and A. Nisikata

TimeAbs#Title
08:00744 Prediction and Measurement of Pitting Damage Functions For AISI Type 403 Blade Alloy - Y. Zhang, D. Macdonald, M. Urquidi-Macdonald (The Pennsylvania State University), G. Engelhardt (OLI Systems Inc.), and B. Dooley (Electric Power Research Institute)
08:20745 Effect of Nitrate on the Critical Potentials of Alloy 22 in Chloride Containing Environments. - G. Ilevbare, K. King, S. Gordon, G. Gdowski, H. Elayat, and T. Summers (Lawrence Livermore National Laboratory)
08:40746 Chlorinated Cold Water Treatment of Alloys for Long Term Corrosion Protection - P. Natishan (Naval Research Laboratory), F. Martin (GEO-Centers, Inc.), and W. O'Grady (Naval Research Laboratory)
09:00747 A Study of the Corrosion Behavior of Inconel 718 after electron Beam Welding (EBW) - C.A. Huang, T.T. Wang (Chang Gung University), W.C. Han, and C.H. Lee (Chief of Spinning Workshop System-Manufacturing Center)
09:20748 Metallurgical and Morphological Considerations for Seawater Crevice Corrosion of Alloy 625 - F.J. Martin (GEO-Centers, Inc.), P.M. Natishan, K.P. Cooper, H.N. Jones, and K.E. Lucas (U.S. Research Naval Lab)
09:40 Twenty-Minute Intermission
10:00749 A New Look at Graphical Representation of Impedance Data with Application to Corrosion in Saline Solutions - M. Orazem (University of Florida), N. Pébčre (CIRIMAT, ENSIACET), and B. Tribollet (Université Pierre et Marie Curie)
10:30750 Exploring the Relationship of Morphology and Structure to Pit Initiation in Cl-implanted Al Thin Films - N. Missert, R.G. Copeland, C. Johnson, P. Kotula, L. Serna, J.C. Barbour, F.D. Wall (Sandia National Laboratories), D. Ellswick, and J. Hren (North Carolina State University)
10:50751 The Effect of Deposited Oxide Thickness and Implanted Cl on the Pitting Behavior of Aluminum - L. Serna, C. Johnson, F.D. Wall, and C. Barbour (Sandia National Laboratories)
11:10752 Experimental and Computational Evaluation of the Corrosion of Alclad AA2024-T3 Exposed at a Seacoast Environment - F. Cui, F. Presuel-Moreno, and R. Kelly (University of Virginia)
11:30753 Analysis of Local Changes in pH During Dissolution of Aluminum Alloy 2024-T3 in Aquaeous NaCl - R. Copeland, N. Missert (Sandia National Labs), and K. Barrett (PrimeCore Systems, Inc.)

Coatings, Ennoblement, and Electrochemical Sensing

Co-Chairs: L. Serna and D. Shifler

TimeAbs#Title
14:00754 H.H. Uhlig Award Address: Pitting Kinetics of Stainless Steels in Mixed or Concentrated Electrolytes - R. Newman (University of Toronto)
14:30755 Morris Cohen Award Address: Effect of Cu Content on Corrosion Behavior and Chromate Conversion Coating Protection of 7xxx Series Al Alloys - Q. Meng (United States Naval Academy)
15:00756 Corrosion Sensing and Inhibiting Ce-modified Bentonite Clay Pigments for Protective Organic Coatings - S. Chrisanti and R. Buchheit (Ohio State University, Dept. of Materials Science and Eng.)
15:20757 Novel Surface Treatment Processes to Protect Metal Substrates - S.P. Kumaraguru and B. Popov (University of South Carolina)
15:50758 Ennoblement Response During a Warm-to-Cold Seawater Transition - F. Martin (GEO-Centers), C. Yentsch, D. Phinney (Plankton Research and Instrumentation), P. Natishan, and W. O'Grady (U.S. Naval Research Laboratory)
16:10 Twenty-Minute Intermission
16:30759 Development of Non-Toxic Polymer Coatings with Improved Biofoul Release Properties - F. Mansfeld, E. Kus, M.A. Grunlan, and W.P. Weber (University of Southern California)
16:50760 Corrosion and Hydrogen Permeation Properties of Zn-Ni-X (X= P,Cd) Ternary Alloys - B. Popov, S.P. Kumaraguru, and P. Ganesan (University of South Carolina)
17:10761 Localized Corrosion Currents and pH Profile over B4C, SiC and Al2O3 Reinforced 6092 Aluminum Composites in ASTM seawater - H. Ding and L. Hihara (Department of Mechanical Engineering, University of Hawaii at Manoa,)
17:30762 Electrochemical Noise Analysis for the Under-Film Corrosion of Polymer Coated Iron - Y. Itoi, S. Take, and M. Okuyama (Oyama National College of Technology)
17:50763 Dopant Anion Effects in the Inhibition by Polyaniline of Corrosion-Driven Organic Coating Delamination on Iron - N. McMurray, G. Williams, and A. Gabriel (University of Wales Swansea)

Coral Lounge, Level 6, Mid Pacific Conference Center

Tuesday Evening Poster Session and Technical Exhibit

TimeAbs#Title
o764 Influence of Stress-Induced Martensite on SCC of SUS304 in H2SO4-NaCl Aqueous Solution - K. Majima, S. Sunada, and A. Motozawa (Department of Material Systems Engineering and Life Science, Faculty of Engineering)
o765 Atmospheric Corrosion of Zinc and Zinc Alloy Using In-situ Raman Spectroscopy - M. Ueda, M. Matsuda, and T. Ohtsuka (Hokkaido University)
o766 Corrosion Monitoring of Steels Based on Electrochemical Noise Impedance - M. Yaginuma, A. Nishikata, and T. Tsuru (Tokyo Institute of Technology)
o767 Initial Stage of Pitting Corrosion of SUS 304 under Thin Electrolyte Layers Containing Chloride Ions - Y. Tsutsumi, A. Nishikata, and T. Tsuru (Tokyo Institute of Technology)
o768 Investigation into the formation and removal of adhesion substance on possible heat exchanger materials in Singapore seawater - Q. Liu (Chemical and Process Engineering Centre), D.J. Blackwood (National University of Singapore), K. Fujita, and K. Oonishi (Sumitomo Chemical Co. Ltd)