3 Plans to Avoid Blackouts Using 100% Renewable Energy

SolarResearchers have proposed three different methods for providing consistent power in 139 countries using 100 percent renewable energy.

The inconsistencies of power produced by wind, water, and sunlight and the continuously fluctuating demand for energy often hinder renewable energy solutions. In a new paper, which appears in Renewable Energy, the researchers outline several solutions to making clean power reliable enough for all energy sectors—transportation; heating and cooling; industry; and agriculture, forestry, and fishing—in 20 world regions after all sectors have converted to 100 percent clean, renewable energy.

The researchers previously developed roadmaps for transitioning 139 countries to 100 percent clean, renewable energy by 2050 with 80 percent of that transition completed by 2030. The present study examines ways to keep the grid stable with these roadmaps.

Multiple solutions

“Based on these results, I can more confidently state that there is no technical or economic barrier to transitioning the entire world to 100 percent clean, renewable energy with a stable electric grid at low cost,” says lead author Mark Z. Jacobson, a professor of civil and environmental engineering at Stanford University who is also a senior fellow at the Stanford Precourt Institute for Energy and the Stanford Woods Institute for the Environment.

“This solution would go a long way toward eliminating global warming and the 4 million to 7 million air pollution–related deaths that occur worldwide each year, while also providing energy security.”

The paper builds on a previous 2015 study by Jacobson and colleagues that examined the ability of the grid to stay stable in the 48 contiguous United States. That study only included one scenario for how to achieve the goals. Some criticized that paper for relying too heavily on adding turbines to existing hydroelectric dams—which the group suggested in order to increase peak electricity production without changing the number or size of the dams.

The previous paper was also criticized for relying too much on storing excess energy in water, ice, and underground rocks. The solutions in the current paper address these criticisms by suggesting several different solutions for stabilizing energy produced with 100 percent clean, renewable sources, including solutions with no added hydropower turbines and no storage in water, ice, or rocks.

“Our main result is that there are multiple solutions to the problem,” says Jacobson. “This is important because the greatest barrier to the large-scale implementation of clean renewable energy is people’s perception that it’s too hard to keep the lights on with random wind and solar output.”

Meeting demand

At the heart of this study is the need to match energy supplied by wind, water, and solar power and storage with what the researchers predict demand to be in 2050. To do this, they grouped 139 countries—for which they created energy roadmaps in a previous study—into 20 regions based on geographic proximity and some geopolitical concerns.

Unlike the previous 139-country study, which matched energy supply with annual-average demand, the present study matches supply and demand in 30-second increments for 5 years (2050-2054) to account for the variability in wind and solar power as well as the variability in demand over hours and seasons.

For the study, the researchers relied on two computational modeling programs. The first program predicted global weather patterns from 2050 to 2054. From this, they further predicted the amount of energy that could be produced from weather-related energy sources like onshore and offshore wind turbines, solar photovoltaics on rooftops, and in power plants, concentrated solar power plants, and solar thermal plants over time. These types of energy sources are variable and don’t necessarily produce energy when demand is highest.

The group then combined data from the first model with a second model that incorporated energy produced by more stable sources of electricity, like geothermal power plants, tidal and wave devices, and hydroelectric power plants, and of heat, like geothermal reservoirs. The second model also included ways of storing energy when there was excess, such as in electricity, heat, cold, and hydrogen storage. Further, the model included predictions of energy demand over time.

With the two models, the group was able to predict both how much energy could be produced through more variable sources of energy, and how well other sources could balance out the fluctuating energy to meet demands.

Keeping the lights on

Scenarios based on the modeling data avoided blackouts at low cost in all 20 world regions for all five years examined and under three different storage scenarios. One scenario includes heat pumps—which are used in place of combustion-based heaters and coolers—but no hot or cold energy storage; two add no hydropower turbines to existing hydropower dams; and one has no battery storage.

The fact that no blackouts occurred under three different scenarios suggests that many possible solutions to grid stability with 100 percent wind, water, and solar power are possible, a conclusion that contradicts previous claims that the grid cannot stay stable with such high penetrations of just renewables.

Overall, the researchers found that the cost per unit of energy—including the cost in terms of health, climate and energy—in every scenario was about one quarter what it would be if the world continues on its current energy path. This is largely due to eliminating the health and climate costs of fossil fuels. Also, by reducing water vapor, the wind turbines included in the roadmaps would offset about 3 percent of global warming to date.

Although the cost of producing a unit of energy is similar in the roadmap scenarios and the non-intervention scenario, the researchers found that the roadmaps roughly cut in half the amount of energy needed in the system. So, consumers would actually pay less.

The vast amount of these energy savings come from avoiding the energy needed to mine, transport, and refine fossil fuels, converting from combustion to direct electricity, and using heat pumps instead of conventional heaters and air conditioners.

“One of the biggest challenges facing energy systems based entirely on clean, zero-emission wind, water, and solar power is to match supply and demand with near-perfect reliability at reasonable cost,” says Mark Delucchi, coauthor of the paper and a research scientist at the University of California, Berkeley. “Our work shows that this can be accomplished, in almost all countries of the world, with established technologies.”

Planning ahead, working together

Jacobson and his colleagues says that a remaining challenge of implementing their roadmaps is that they require coordination across political boundaries.

“Ideally, you’d have cooperation in deciding where you’re going to put the wind farms, where you’re going to put the solar panels, where you’re going to put the battery storage,” says Jacobson. “The whole system is most efficient when it is planned ahead of time as opposed to done one piece at a time.”

In light of this geopolitical complication, they are also working on smaller roadmaps to help individual towns, many of which have already committed to achieving 100 percent renewable energy.

Additional coauthors of this paper are from Aalborg University in Denmark and UC Berkeley.


This article appeared on Futurity. Read the article.

Source: Stanford University

DISCLAIMER

All content provided in the ECS blog is for informational purposes only. The opinions and interests expressed here do not necessarily represent ECS's positions or views. ECS makes no representation or warranties about this blog or the accuracy or reliability of the blog. In addition, a link to an outside blog or website does not mean that ECS endorses that blog or website or has responsibility for its content or use.

Post Comments

Your email address will not be published. Required fields are marked *