Fuel CellApplying a tiny coating of costly platinum just 1 nanometer thick—about 1/100,000th the width of a human hair—to a core of much cheaper cobalt could bring down the cost of fuel cells.

This microscopic marriage could become a crucial catalyst in new fuel cells that use generate electricity from hydrogen fuel to power cars and other machines. The new fuel cell design would require far less platinum, a very rare metal that sold for almost $900 an ounce the day this article was produced.

“This technique could accelerate our launch out of the fossil-fuel era,” says Chao Wang, an assistant professor of chemical and biomolecular engineering at Johns Hopkins University and senior author of a study published in the journal Nano Letters.

“It will not only reduce the cost of fuel cells,” Wang says. “It will also improve the energy efficiency and power performance of clean electric vehicles powered by hydrogen.”

(more…)

Fuel CellA closer look at catalysts is giving researchers a better sense of how these atom-thick materials produce hydrogen.

Their findings could accelerate the development of 2D materials for energy applications, such as fuel cells.

The researchers’ technique allows them to probe through tiny “windows” created by an electron beam and measure the catalytic activity of molybdenum disulfide, a two-dimensional material that shows promise for applications that use electrocatalysis to extract hydrogen from water.

Initial tests on two variations of the material proved that most production is coming from the thin sheets’ edges.

Researchers already knew the edges of 2D materials are where the catalytic action is, so any information that helps maximize it is valuable, says Jun Lou, a professor of materials science and nanoengineering at Rice University whose lab developed the technique with colleagues at Los Alamos National Laboratory.

(more…)

Researchers have created a way to look inside fuel cells to see the chemical processes that lead them to breakdown.

Fuel cells could someday generate electricity for nearly any device that’s battery-powered, including automobiles, laptops, and cellphones. Typically using hydrogen as fuel and air as an oxidant, fuel cells are cleaner than internal combustion engines because they produce power via electrochemical reactions. Since water is their primary product, they considerably reduce pollution.

The oxidation, or breakdown, of a fuel cell’s central electrolyte membrane can shorten their lifespan. The process leads to formation of holes in the membrane and can ultimately cause a chemical short circuit. Engineers created the new technique to examine the rate at which this oxidation occurs with hopes of finding out how to make fuel cells last longer.

Using fluorescence spectroscopy inside the fuel cell, they are able to probe the formation of the chemicals responsible for the oxidation, namely free radicals, during operation. The technique could be a game changer when it comes to understanding how the cells break down, and designing mitigation strategies that would extend the fuel cell’s lifetime.

“If you buy a device—a car, a cell phone—you want it to last as long as possible,” says Vijay Ramani, professor of environment & energy at the School of Engineering & Applied Science at Washington University in St. Louis.

(more…)

Researchers at Los Alamos National Laboratory (LANL) are taking a closer look at fuel cell catalysts in hopes of finding a viable alternative to the expensive platinum and platinum-group metal catalysts currently used in fuel cell electrodes. Developments in this area could lead to more affordable next-generation polymer electrolyte fuel cells for vehicles.

The research, led by ECS fellow Piotr Zelenay, looks at the fuel cell catalysts at the atomic level, providing unique insight into the efficiency of non-precious metals for automotive and other applications.

“What makes this exploration especially important is that it enhances our understanding of exactly why these alternative catalysts are active,” Zelenay says. “We’ve been advancing the field, but without understanding the sources of activity; without the structural and functional insights, further progress was going to be very difficult.”

This from LANL:

Platinum aids in both the electrocatalytic oxidation of hydrogen fuel at the anode and electrocatalytic reduction of oxygen from air at the cathode, producing usable electricity. Finding a viable, low-cost PGM-free catalyst alternative is becoming more and more possible, but understanding exactly where and how catalysis is occurring in these new materials has been a long-standing challenge. This is true, Zelenay noted, especially in the fuel cell cathode, where a relatively slow oxygen reduction reaction, or ORR, takes place that requires significant ‘loading’ of platinum.

(more…)

Fuel CellInterest in electric and hybrid vehicles continues to grow across the globe. The world economy saw EV sales go from around 315,000 in 2014 to 536,000 in 2015, and trends so far for 2016 show that the number of vehicles sold this year is on track to far exceed numbers we’ve seen in previous years.

Moving EVs forward

But in order to make these cars, there needs to be an energy storage source that is not only sustainable, but cheap to produce, with high efficiency, and can be easily mass produced. One of the leading contenders in that race has become fuel cell technology.

In recent years, new materials and better heat management processes have advanced fuel cells. Now, researchers from Lawrence Berkeley National Lab’s NERSC center (including ECS Fellow Radoslav Adzic and ECS member Kotaro Sasaki) are putting their chips on polymer electrolyte fuel cells (PEFCs) to be at the forefront of fuel cell technology due recent finds. In a new study, the group showed that PEFCs could be made to run more efficiently and produced more cost-effectively by reducing the amount of a single key ingredient: platinum.

Laboratory curiosity

While fuel cells date back to 1839, they spent a majority of their existence as laboratory curiosities. It wasn’t until the 1950s when fuel cells finally made their way to the main stage, eventually going on to power the Gemini and Apollo space flights in the 1960s.

(more…)

Nissan is taking a big step toward eco-friendly transportation with the development of their new solid oxide fuel cell vehicle.

The science behind the vehicle, which the car company has branded e-Bio Fuel-Cell, uses bio-ethanol fuel to generate electricity through SOFC technology. Nissan states that sugarcane, corn, and soy can all be used as means of fuel – resulting in a carbon neutral cycle when the car hits the road.

Nissan claims a higher driving range and lower charge time than conventional electric vehicles, with a cruising range of more than 600 km (373 miles).

The company expects the vehicle to be ready for commercial purchase as early as 2020.

Fuel cells have existed (at least in theory) since the early 1800s, but have spent much of their existence as laboratory curiosities. It wasn’t until the mid-1900s that fuel cells finally got their time in the spotlight with the first major application in the Gemini and Apollo space flights.

While fuel cells have moved forward in the competitive field of energy storage, there are still many barriers that researchers are attempting to overcome. Especially today, with society making a conscious effort to move toward more sustainable types of power, much emphasis has been put on solid oxide fuel cells and moving them from the lab to the market.

(MORE: Get additional information on the evolution of fuel cell technology.)

A team of researchers from Washington State University believes they may have taken a crucial step in doing just that.

Moving fuel cells forward

The team recently published a paper detailing what they believe to be a key step in SOFC improvement and eventually implementation in the marketplace. These small improvements could mean big changes.
SOFCs, unlike other types of fuel cells, do not require the use of expensive materials (i.e. platinum) to develop.

“Solid oxide fuel cells are very fuel flexible in contrast to other kinds of fuel cells, like alkaline fuel cells,” Subhash Singhal, Battelle Fellow Emeritus at Pacific Northwest National Laboratory and esteemed fuel cell expert, told ECS in a previous interview. “Solid oxide fuel cells can use a variety of fuel: natural gas, coal gas, and even liquid fuels like diesel and gasoline.”

(more…)

As far back as 1839, the English scientist William Grove had the idea that the reactants of a battery could be gases fed into it from external tanks. For most of their history, fuel cells existed only as laboratory curiosities. But fuel cells have gained much more attention in recent years, with many considering these power sources for applications in vehicles and alternative grid technology.

New research from Harvard University shows just how promising fuel cell technology could be. According to the study, the researchers were able to develop more efficient fuel cells that get more robust as they age instead of degrading.

“The elegance of this process is that it happens naturally when exposed to the electrons in fuel,” says Shriram Ramananthan, lead author of the study and past ECS member. “This technique can be applied to other electrochemical devices to make it more robust. It’s like chess—before we could only play with pawns and bishops, tools that could move in limited directions. Now, we’re playing with the queen.”

After Toyota’s 2015 release of the first mass-market fuel cell car, the Japanese automaker is gearing up to release the second generation of its fuel cell vehicle in 2019.

The initial version of the Mirai, which was heralded by Toyota as the ultimate “green car,” could travel up to 300 miles on a single tank of hydrogen and refuel in less than five minutes. The starting price for the vehicle is currently $57,460.

Toyota’s new version of the Mirai promises to be more affordable than its predecessor, potentially making the clean energy vehicle well-received among consumers.

(more…)

Powering Fuel Cells with Wastewater

The word “renewable” often triggers thoughts of solar and wind in the realm of energy technology.

Two researchers from Virginia Tech are now trying to change that perception, focusing on maximizing the amount of electricity that can be generated from the wastewater we flush down the toilet.

They’re turning poo into power.

(MORE: See what ECS scientists are doing to transform wastewater.)

“Tracing the bacteria gave us a major piece of the puzzle to start generating electricity in a sustainable way,” said Xueyang Feng, co-author of the study. “This is a step toward the growing trend to make wastewater treatment centers self-sustaining in the energy they use.”

  • Page 2 of 4