Solar Cells Take Inspiration from Art

One of the more common issues with solar cell efficiency is their inability to move with the sun as it crosses the sky. While large scale solar panels can be fitted with bulky motorized trackers, those with rooftop solar panels do not have that luxury. In an effort to solve this issues, researchers are drawing some inspiration from art in their mission toward higher solar efficiency.

Scientists are applying some of the shapes and designs from the ancient art of kirigami—the Japanese art of paper cutting—to develop a solar cell that can capture up to 36 percent more energy due to the design’s ability to grab more sun.

“The design takes what a large tracking solar panel does and condenses it into something that is essentially flat,” said Aaron Lamoureux, a doctoral student in materials science and engineering and first author on the paper.

In the United States alone, there are currently over 20,000 MW of operational solar capacity. Nearly 640,000 U.S. homes have opted to rely on solar power. However, if the home panels were able to follow the sun’s movement on a daily basis, we could see a dramatic increase in efficiency and usage.

(more…)

The New iPhone 6S and the Science Behind It

smartphone_homeOnce again, Apple is doing its best to give electronics a huge boost into the future with the release of the new iPhone 6S and iPhone 6S Plus. The technological top dog has upgraded everything from the phone’s processors to its camera—and Apple has finally brought the much anticipated 3D touch capability to life.

While most consumers focus their attention to the phone’s new entertainment abilities and usage innovation, we like to focus on some different aspects here at ECS. While Apple’s Timothy Cook may not have mentioned electrochemistry or solid state science in announcing the new iPhone, these sciences are what allow for higher processing speeds, improved displays, touch recognition, longer battery life, and much more.

Get a full understanding of the science behind the smartphone.

Highlights of the iPhone 6S:

  • Improved 12 megapixel camera
  • Qualocomm chip to double LTE speeds from 150 mbps to 300 mbps
  • Improved TouchID fingerprint sensor
  • New 64-bit chip for 70 percent faster CPU
  • 3D touch capability through sensor technology

Get more info on the iPhone 6S.

PS: Listen to technology and engineering expert Lili Deligianni’s podcast on innovation in electronics!

Power Behind the Next Electronics Revolution

The semiconducting silicon chip brought about a wave of electronic transformation the propelled technology and forever changed the way society functions. We now live in a digital world, where almost everything we encounter on a daily basis is comprised of a mass of silicon integrated circuits (IC) and transistors. But with the materials used to develop and improve these devices being pushed to their limits, the question of the future of electronics arises.

The Beginnings

The move towards a digital age really took flight late in 1947 at Bell Labs when a little device known as the transistor was developed. After this development, Gordon Moore became a pioneering research in the field of electronics and coined Moore’s law in 1965, which dictated that transistor density would double every two years.

Just over 50 years after that prediction, Moore’s law is still holding true. However, researchers and engineers are beginning to hit a bit of a roadblock. Current circuit measurement are coming in a 2nm wide—equating to a size roughly between a red blood cell and a single strand of DNA. Because the integrated circuits are hitting their limit in size, it’s becoming much more difficult to continue the projected growth of Moore’s law.

The question then arises of how do we combat this problem; or do we move toward finding an alternative to silicon itself? What are the true limits of technology?

(more…)

Latest in Flexible Technology

Thanks to a development in OLED (organic light-emitting diode) technology by LG, we can now roll up our television screens like a newspaper.

LG recently unveiled their new 18-inch television panels, which are so flexible they can be rolled up to 3-centemeters without affecting the display or functionality.

The company achieved this through innovation in OLED technology, which allows for thinner, lighter, and more flexible screens. This technology is also lending itself to the second screen LG unveiled, which is nearly transparent.

But why would you want to roll up your television screen? Well, you probably wouldn’t. However, the bendable nature of the panels makes the screens virtually unbreakable and give them the ability to curve to walls to make your viewing experience more aesthetically pleasing.

“LG Display pioneered the OLED TV market and is now leading the next-generation applied OLED technology,” In-Byung Kang, LG Display’s senior vice president and head of the R&D Center, said in a statement. “We are confident that by 2017, we will successfully develop an Ultra HD flexible and transparent OLED panel of more than 60 inches, which will have transmittance of more than 40 percent and a curvature radius of 100R, thereby leading the future display market.”

High-Density Storage, 100 Times Less Energy

Tired of your electronics running out of memory? Rice University’s James Tour and his group of researchers have developed a solid state memory technology that allows for high-density storage while requiring 100 times less energy than traditional designs to operate.

The memory technology has been developed via tantalum oxide, a common insulator in electronics.

This from Futurity:

The discovery by the Rice University lab of chemist James Tour could allow for crossbar array memories that store up to 162 gigabits, much higher than other oxide-based memory systems under investigation by scientists. (Eight bits equal one byte; a 162-gigabit unit would store about 20 gigabytes of information.)

Read the full release here.

James Tour—a past ECS lecturer and pioneer in molecular electronics— and his group at Rice University’s Smalley Institute of Nanoscale Science & Technology are constantly demonstrating the interdisciplinary nature of nano science, and this is no exception. From the development of flexible supercapacitors to using cobalt films for clean fuel production, Tour and his lab are exploring many practical applications where chemistry and nano science intersect.

(more…)

There are more than 250 million cars and trucks on U.S. roads. From these vehicles, roughly 135 billion gallons of gasoline are consumed each year in the United States. In fact, 28 percent of energy used in the country is in the transportation sector.

While many may think that the majority of this consumption would come from planes or trains, personal cars and trucks actually consume 60 percent of all energy used here. Unfortunately, most of that energy is lost to heat and other inefficiencies within the vehicles, leaving only about 10 to 16 percent of a car’s fuel being used to actually drive and overcome road resistance.

However, the researchers at Virginia Tech may have a partial solution to this problem: harvesting energy from a car’s suspension.

(more…)

This new extended-release device has less risk of breaking or causing intestinal blockage than previous prototypes.Image: MIT

This new extended-release device has less risk of breaking or causing intestinal blockage than previous prototypes.
Image: MIT

Researchers and engineers in all corners of science have been looking at the ways their specific technical interest area can affect medicine and health care. Whether it be implantable microchip-based devices that could outpace injections and conventional pills or jet-propelled micromotors that can swim through the body to take tissue samples and make small surgical repairs, researchers have been seeing the interdisciplinary nature of science and how it could impact quality of life.

A team of researchers from MIT’s Koch Institute for Integrative Cancer Research have teamed up with Massachusetts General Hospital to develop the latest scientific advancement in health care in the form of a polymer gel that will allow for ultra-long drug delivery.

The prototype that the team has built is essentially a ring-shaped device that can be folded into a capsule. Once the patient has ingested the capsule, the device can expand back to its original form and deliver drugs over a number of days, weeks, or potentially months.

(more…)

The new study also opens the door to identifying other molecules floating in space.Image: NASA/JPL

The new study also opens the door to identifying other molecules floating in space.
Image: NASA/JPL

Buckyballs—or buckminsterfullerenes, named for their structural similarities to the designs of Buckminster Fuller—have just answered the 100-year-old question of odd variations in light coming through interstellar space.

Astronomers once assumed that this cosmic-light was the result of dust or other tiny space detritus, but a team of chemists have now determined that it is actually the result of buckyballs floating around in space.

Though this isn’t the first time that buckyballs were found in far-off locations. In 2010, researchers spotted the first ever buckyballs in space using the Spitzer telescope.

ECS Podcast – “A Word About Nanocarbons”
Listen as some of the world-leading scientists in nanocarbon and fullerene research discuss the monumental role buckyballs have played in science.

However, the spotting in 2010 proved that buckyballs can indeed exist in space, whereas the current buckyball spotting solve a nearly century-long question that has troubled astronomers globally.

(more…)

The Future of Superconductors

This emerging technology may lead to a theory to guide future engineers.Image: Futurity/Christian Benke

This emerging technology may lead to a theory to guide future engineers.
Image: Futurity/Christian Benke

Researchers from Cornell University are focusing their efforts on developing superconductors that can carry large energy currents, thereby expanding the possible benefits that can be produced by high-temperature superconductors.

In order to coax the superconductors to carry these large currents, researchers have previously bombarded materials with high-energy ion beams. This approach increased the current density carried, but still left the question of what is actually happening in this reaction.

Thanks to the technology of the scanning tunneling microscope (STM), the researchers can now understand what is happening at the atomic level. (German physicist, Gerd Binnig, won the Nobel Prize in Physics in 1986 for the invention of the scanning tunneling microscope He gave the ECS Lecture at the 203rd ECS Meeting in Paris, France.)

(more…)

IBM’s New Chip Quadruples Capacity

In recent years, the semiconductor industry has struggled to keep up with the pace of the legendary Moore’s Law. With the current 14-nanometer generation of chips, researchers have begun to question if it will remain possible to double transistor density every two and a half years. However, IBM is now pushing away the doubt with the development of their new chip.

The new ultra-dense chip hosts seven-nanometer transistors, which yields about four times the capacity of our current computer chip. Like many other researchers in the field, IBM decided to move away for the traditional and expensive pure silicon toward a silicon-germanium hybrid material to produce the new chip.

The success of the high-capacity chip relies on the utilization of this new material. The use of silicon-germanium has made it possible for faster transistor switching and lower power requirements. And did we mention how impossibly small these transistors are?

(more…)