The technology can be applied on top of an existing module or integrated into a new module during assembly, on flat or curved surfaces.Credit: CSEM

The technology can be applied on top of an existing module or integrated into a new module during assembly, on flat or curved surfaces.
Credit: CSEM

The Swiss company, Center for Electronics and Microtechnology (CSEM), has announced that they have developed the world’s first white solar modules. According to the company, this will allow for a more visually appealing solar module, which will blend into buildings to become virtually invisible.

The current blue-black solar modules are built to maximize sunlight absorption, whereas a white solar module was previously not a color option due to the fact that the color would generally reflect light, rather than absorbing it.

This from CSEM:

CSEM has developed a new technology to make white solar modules, with no visible cells and connections, a reality. It combines a solar cell technology able to convert infrared solar light into electricity and a selective scattering filter, which scatters the whole visible spectrum while transmitting infrared light. Any solar technology based on crystalline silicon can now be used to manufacture white – and colored – modules.

(more…)

2 New Job Postings in Electrochemistry

Find openings in your area via the ECS job board.

Find openings in your area via the ECS job board.

ECS’s job board keeps you up-to-date with the latest career opportunities in electrochemical and solid-state science. Check out the latest openings that have been added to the board:

Postdoctoral Research Associate, Battery Manufacturing
Oak Ridge National Laboratory – Oak Ridge, Tennessee
Under general supervision, the postdoctoral research associate will be conducting research specifically in battery manufacturing R&D to lower cost, raise energy density, increase production yield, and address manufacturing bottlenecks. This incumbent will work in close collaboration with other researchers involved with ORNL’s applied energy storage program. This position resides in the Department of Energy (DOE) Battery Manufacturing Facility and the Manufacturing Systems Research Group at the Oak Ridge National Laboratory (ORNL).

Director at the Helmholtz Institute Erlangen-Nürnberg for Renewable Energy Production (HI ERN)
Forschungszentrum Jülich GmbH – Jülich, Germany
We are seeking an internationally respected researcher in the field of electrocatalysis, who is capable of further developing in particular the material and process engineering principles of electrolytic water splitting at the highest scientific level. It is envisaged that research activities will be complementary to and interlinked with work at Jülich‘s Institute of Energy and Climate Research (IEK) with its sub-institutes involved in electrochemical, process engineering, and materials science research, and with research work at the Erlangen cluster of excellence Engineering of Advanced Materials.

Norwegian entrepreneur, Jostein Eikeland, is finally unveiling the development his has been working on in secret for the past decade in hopes to jolt the world of energy storage.

Eikeland and his company Alevo plan to reveal a battery that will last longer and cost far less than the current rival technologies. To do this, they have developed a technology that is to store excess electricity generated by power plants.

This from Reuters:

The company has created what it calls GridBanks, which are shipping containers full of thousands of battery cells. Each container can deliver 2 megawatts of power, enough to power up to 1,300 homes for an hour. The batteries use lithium iron phosphate and graphite as active materials and an inorganic electrolyte – what Eikeland called the company’s “secret sauce” – that extends longevity and reduces the risk of burning. They can be charged and discharged over 40,000 times, the company said.

(more…)

It’s a good day for renewable resources.

According to a jointly written report of solar photovoltaic systems (PV) pricing trends from the Energy Department’s (DOE) National Renewable Energy Laboratory (NREL) and Lawrence Berkeley National Laboratory (LBNL), prices have dropped by 12 to 19 percent nationwide in 2013.

The report goes on to state that prices are expected to drop an additional 3 to 12 percent in 2014. The variation in percentage is dependent on the system location and market segment.

(more…)

Brainstorming

Over 100 researchers were guided through a brainstorming and working group session with the theme of improving access to clean water and sanitation in developing countries.

ECS is awarding $210,000 of seed funding to four innovative research projects addressing critical technology gaps in water, sanitation, and hygiene challenges being faced around the world.

Winners of the first Science for Solving Society’s Problems Challenge:

Artificial Biofilms for Sanitary/Hygienic Interface Technologies (A-Bio SHIT)
Plamen Atanassov, University of New Mexico, $70,000
Interfaces: Produce bio-catalytic septic cleaning materials that incorporate microorganisms removing organic and inorganic contaminants, while simultaneously creating electricity (or hydrocarbon fuel) for energy generation in support of a sustainable and portable system.

In-situ Electrochemical Generation of the Fenton Reagent for Wastewater Treatment
Luis Godinez, Centro de Investigacion y Desarrollo Tecnologico en Electroquimica SC, Mexico, $50,000
Disinfection: Study the electro-Fenton approach using activated carbon to efficiently oxidize most of the organic and biological materials present in sanitary wastewater so that recycling of the wastewater might be possible.

powerPAD
Neus Sabate, Institut de Microelectrónica de Barcelona (CSIC); Juan Pablo Esquivel, University of Washington; Erik Kjeang, Simon Fraser University, $50,000
Monitoring and Measurement: Develop a non-toxic portable source of power for water measuring and monitoring systems, which will not require recycling facilities. Using inexpensive materials such as paper, nanoporous carbon electrodes and organic redox species, the team will strive to create a biodegradable and even compostable power source.

More than MERe microbes: Microbial Electrochemical Reactors for water reuse in Africa
Gemma Reguera, Michigan State University, $40,000
Chemical Conversion: Develop microbial electrochemical reactors that harvest energy from human waste substrates using bioanodes engineered to process the waste into biofuels while simultaneously cleaning water for reuse. The microbial catalysts will be selected for their efficiency at processing the wastes, but also for their versatility to process other residential and agricultural waste substrates. This will provide an affordable, easy to operate system for the decentralized processing of a wide range of wastes for improved sanitation, water reuse, and energy independence.

(more…)

Researcher used microscopy to take an atomic-level look at a cubic garnet material called LLZO that could help enable higher-energy battery designs.Credit: Oak Ridge National Laboratory

Researcher used microscopy to take an atomic-level look at a cubic garnet material called LLZO that could help enable higher-energy battery designs.
Credit: Oak Ridge National Laboratory

The quest for better batteries is an ongoing trend, and now the researchers from the Department of Energy’s Oak Ridge National Laboratory (ORNL) have yet another development to add.

During their research, the scientists found exceptional properties in a garnet material. They now believe that this could lead to the development of higher-energy battery designs.

This from ORNL:

The ORNL-led team used scanning transmission electron microscopy to take an atomic-level look at a cubic garnet material called LLZO. The researchers found the material to be highly stable in a range of aqueous environments, making the compound a promising component in new battery configurations.

Read the full article here.

While most researcher tend to use a pure lithium anode to improve a battery’s energy density, the ORNL scientists believe the LLZO would be an ideal separator material.

“Many novel batteries adopt these two features [lithium anode and aqueous electrolyte], but if you integrate both into a single battery, a problem arises because the water is very reactive when in direct contact with lithium metal,” said ORNL postdoctoral associate Cheng Ma, first author on the team’s study published in Angewandte Chemie. “The reaction is very violent, which is why you need a protective layer around the lithium.”

With developments such as these, which lead to higher-energy batteries – we begin to improve electrified transportation and electric grid energy storage applications. Due to the importance of higher-energy batteries, researchers tend to explore battery designs beyond the limits of lithium-ion technologies.

Read the full study here.

To find out more about battery and how it will revolutionize the future, check out what the ECS Battery Division is doing. Also, head over to the Digital Library to read the latest research (some is even open access!). While you’re there, don’t forget to sign up for e-Alerts so you can keep up-to-date with the fast-paced world of electrochemical and solid-state science.

The Future of Energy Storage

The modified graphene aerogels are promising for high-power electrical energy storage applications due to their high surface area and excellent conductivity.Credit: Ryan Chen

The modified graphene aerogels are promising for high-power electrical energy storage applications due to their high surface area and excellent conductivity.
Credit: Ryan Chen

We all know the buzz around graphene, but now researchers from Lawrence Livermore National Laboratory have found a way to improve upon this ultra-light material to boost the efficiency of your personal electronics.

The team at Lawrence Livermore have turned to graphene aerogel for enhanced electrical energy storage. This new generation of graphene has the potential to smooth power fluctuations in the energy grid, among other things.

(more…)

Major Breakthrough on Fusion Energy Project

The magnetic coils inside the compact fusion (CF) experiment are critical to plasma containment, as pictured in this undated handout photo

The magnetic coils inside the compact fusion experiment pictured in an undated photo provided by Lockheed Martin.
Credit: Reuters/Lockheed Martin

A few days ago we talked about fusion reactors and the new development out of the University of Washington that hopes to makes fusion a reality. Now we’re talking fusion again – only on a much different scale.

Lockheed Martin is making headlines for their announcement that their compact fusion reactors could be functional within one decade.

The company has been working for some time to develop a source of infinite energy, and have been devoting much time to fusion due to its clean and safe properties.

Their work on compact fusion revolves around the idea of using a high fraction of the magnetic field pressure, or all of its potential, to make devices much smaller than previous concepts. If they can achieve this, a reactor small enough to fit on a truck could provide enough power for a small city of up to 100,000 people.

(more…)

UW Reactor Could Make Fusion a Reality

The reactor uses a tokamak design, which is a giant torus surrounded on the sides and in the core by superconducting magnets generating tremendous energy.Credit: University of Washington

The reactor uses a tokamak design, which is a giant torus surrounded on the sides and in the core by superconducting magnets generating tremendous energy.
Credit: University of Washington

Fusion energy appears to be the future of energy storage – or at least it should be. Fusion energy yields zero greenhouse gas emissions, no long-lived radioactive waste, and a nearly unlimited fuel supply.

Up until this point, there has been an economic roadblock in producing this type of energy. The designs that have been penciled out to create fusion power are too expensive and won’t feasibly outperform systems that use fossil fuels.

Now, the engineers at the University of Washington (UW) are hoping to change that. They have designed a concept for a fusion reactor, that when scaled up, would rival costs of fossil fuel plants with similar electrical outputs.

This from the University of Washington:

The design builds on existing technology and creates a magnetic field within a closed space to hold plasma in place long enough for fusion to occur, allowing the hot plasma to react and burn. The reactor itself would be largely self-sustaining, meaning it would continuously heat the plasma to maintain thermonuclear conditions. Heat generated from the reactor would heat up a coolant that is used to spin a turbine and generate electricity, similar to how a typical power reactor works.

Read the full article here.

Currently, the University of Washington’s concept is about one-tenth the size and power output of a final product, which would still be years away.

Does the future of energy interest you? Check out what our Energy Technology Division has to offer. And head over to our Digital Library to see what our scientists are researching in the field of energy storage and conversion.

2014 ECS/SMEQ Meeting in the Books

Edison Theatre

“Pee to Energy” demo at the Edison Theatre in the exhibit hall in Cancun, Mexico. Rob Gerth, Gerri Botte, and Madhi Muthuvel getting ready to go.

I’m working on an official review of what happened at the meeting. In the meantime, I’ve been looking at some of the photos which got me thinking about the adventure that is an ECS meeting.

A couple of quick hits first:

(more…)