First Solar-Powered Bike Lane in Netherlands

SolaRoad coverts sunlight on the road surface into electricity: the road network works as an inexhaustible source of green power.Credit: SolaRoad

SolaRoad converts sunlight on the road surface into electricity: the road network works as an inexhaustible source of green power.
Credit: SolaRoad

A solar-powered cycle path – called SolaRoad – has been unveiled in the Netherlands. The path can generate enough electricity to power three households, reports BBC.

The new path has been installed in Kormmenie, which is 25 kilometers from Amsterdam. While the path is currently 70 meters long, it will be extended to 100 meters by 2016.

Dr. Sten de Wit from SolaRoad believes that this is just the beginning for solar-powered paths. Dr. de Wit foresees solar roads eventually being used to power the electric vehicles that use them, similar to Dutch developer Heijmans and designer Daan Roosegaard in their “smart highway.”

(more…)

Toyota’s Fuel Cell Car Unveiled

Recently, fuel cells have been the hot topic in energy discussions. In accordance with this, Toyota has introduced its first mass-market fuel cell car that will be available for purchase next month.

The company is calling the four-seat sedan Mirai, which means “future” in Japanese. The car will first go on sale in Japan on December 15th, followed by sales in the United States and Europe in the fourth quarter of 2015.

This from Reuters:

The ultimate “green car”, fuel cell vehicles (FCVs) run on electricity made by mixing hydrogen fuel and oxygen in the air – a technology first used in the Apollo moon project in the 1960s. Its only by-product is heat and water – water so pure the Apollo astronauts drank it.

(more…)

Smart Streets: The Highway Is Getting Brighter

The painted road markings are said to be able to glow up to eight hours in the dark.Credit: Roosegaarde

The painted road markings are said to be able to glow up to eight hours in the dark.
Credit: Roosegaarde

There has been a great deal of debate and innovation in smart cars recently, but why just stop at the car? Why not make a smart highway?

At least that’s the question Dutch developer Heijmans and designer Daan Roosegaard are asking. Since 2012 the duo have been talking about and drumming up game plans for innovative designs that would improve road sustainability, safety, and perception.

These ideas include: electric priority lane, which would allow electric cars to charge themselves while driving; dynamic paint, which would glow or become transparent upon sensing temperature in order to let you know road conditions; and interactive light, which would be controlled by sensors to active only when traffic approaches in order to create sustainable road light.

But the company’s main, and most tangible, development is their glow-in-the-dark lining.

(more…)

Engineers at UC San Diego have developed a nanoparticle-based material for concentrating solar power plants that converts 90% of captured sunlight to heat. With particle sizes ranging from 10 nanometers to 10 micrometers, the multiscale structure traps and absorbs light more efficiently and at temperatures greater than 700 degrees Celsius.Credit: Renkun Chen, Mechanical Engineering Professor, UC San Diego Jacobs School of Engineering

Engineers at UC San Diego have developed a nanoparticle-based material for concentrating solar power plants that converts 90% of captured sunlight to heat.
Credit: Renkun Chen, Mechanical Engineering Professor, UC San Diego Jacobs School of Engineering

An engineering team from the University of California, San Diego, has developed a new nanoparticle-based material for concentrating solar power. The new research, which has been funded by the U.S. Department of Energy’s SunShot program and published in the journal Nano Energy, aims to convert 90 percent of captured light into heat and make solar costs more competitive.

The new material will be able to withstand temperatures greater than 700° Celsius and can survive many years outdoors, despite exposure to humidity.

“We wanted to create a material that absorbs sunlight that doesn’t let any of it escape. We want the black hole of sunlight,” said Sungho Jin, a professor in the department of Mechanical and Aerospace Engineering at UC San Diego Jacobs School of Engineering.

This from the University of California, San Diego:

The novel material features a “multiscale” surface created by using particles of many sizes ranging from 10 nanometers to 10 micrometers. The multiscale structures can trap and absorb light which contributes to the material’s high efficiency when operated at higher temperatures.

Read the full article here.

Head over to our Digital Library and read more research by Sungho Jin, one of the developers of the Silicon boride-coated nanoshell material.

The technology can be applied on top of an existing module or integrated into a new module during assembly, on flat or curved surfaces.Credit: CSEM

The technology can be applied on top of an existing module or integrated into a new module during assembly, on flat or curved surfaces.
Credit: CSEM

The Swiss company, Center for Electronics and Microtechnology (CSEM), has announced that they have developed the world’s first white solar modules. According to the company, this will allow for a more visually appealing solar module, which will blend into buildings to become virtually invisible.

The current blue-black solar modules are built to maximize sunlight absorption, whereas a white solar module was previously not a color option due to the fact that the color would generally reflect light, rather than absorbing it.

This from CSEM:

CSEM has developed a new technology to make white solar modules, with no visible cells and connections, a reality. It combines a solar cell technology able to convert infrared solar light into electricity and a selective scattering filter, which scatters the whole visible spectrum while transmitting infrared light. Any solar technology based on crystalline silicon can now be used to manufacture white – and colored – modules.

(more…)

Norwegian entrepreneur, Jostein Eikeland, is finally unveiling the development his has been working on in secret for the past decade in hopes to jolt the world of energy storage.

Eikeland and his company Alevo plan to reveal a battery that will last longer and cost far less than the current rival technologies. To do this, they have developed a technology that is to store excess electricity generated by power plants.

This from Reuters:

The company has created what it calls GridBanks, which are shipping containers full of thousands of battery cells. Each container can deliver 2 megawatts of power, enough to power up to 1,300 homes for an hour. The batteries use lithium iron phosphate and graphite as active materials and an inorganic electrolyte – what Eikeland called the company’s “secret sauce” – that extends longevity and reduces the risk of burning. They can be charged and discharged over 40,000 times, the company said.

(more…)

It’s a good day for renewable resources.

According to a jointly written report of solar photovoltaic systems (PV) pricing trends from the Energy Department’s (DOE) National Renewable Energy Laboratory (NREL) and Lawrence Berkeley National Laboratory (LBNL), prices have dropped by 12 to 19 percent nationwide in 2013.

The report goes on to state that prices are expected to drop an additional 3 to 12 percent in 2014. The variation in percentage is dependent on the system location and market segment.

(more…)

The Future of Energy Storage

The modified graphene aerogels are promising for high-power electrical energy storage applications due to their high surface area and excellent conductivity.Credit: Ryan Chen

The modified graphene aerogels are promising for high-power electrical energy storage applications due to their high surface area and excellent conductivity.
Credit: Ryan Chen

We all know the buzz around graphene, but now researchers from Lawrence Livermore National Laboratory have found a way to improve upon this ultra-light material to boost the efficiency of your personal electronics.

The team at Lawrence Livermore have turned to graphene aerogel for enhanced electrical energy storage. This new generation of graphene has the potential to smooth power fluctuations in the energy grid, among other things.

(more…)

Major Breakthrough on Fusion Energy Project

The magnetic coils inside the compact fusion (CF) experiment are critical to plasma containment, as pictured in this undated handout photo

The magnetic coils inside the compact fusion experiment pictured in an undated photo provided by Lockheed Martin.
Credit: Reuters/Lockheed Martin

A few days ago we talked about fusion reactors and the new development out of the University of Washington that hopes to makes fusion a reality. Now we’re talking fusion again – only on a much different scale.

Lockheed Martin is making headlines for their announcement that their compact fusion reactors could be functional within one decade.

The company has been working for some time to develop a source of infinite energy, and have been devoting much time to fusion due to its clean and safe properties.

Their work on compact fusion revolves around the idea of using a high fraction of the magnetic field pressure, or all of its potential, to make devices much smaller than previous concepts. If they can achieve this, a reactor small enough to fit on a truck could provide enough power for a small city of up to 100,000 people.

(more…)

UW Reactor Could Make Fusion a Reality

The reactor uses a tokamak design, which is a giant torus surrounded on the sides and in the core by superconducting magnets generating tremendous energy.Credit: University of Washington

The reactor uses a tokamak design, which is a giant torus surrounded on the sides and in the core by superconducting magnets generating tremendous energy.
Credit: University of Washington

Fusion energy appears to be the future of energy storage – or at least it should be. Fusion energy yields zero greenhouse gas emissions, no long-lived radioactive waste, and a nearly unlimited fuel supply.

Up until this point, there has been an economic roadblock in producing this type of energy. The designs that have been penciled out to create fusion power are too expensive and won’t feasibly outperform systems that use fossil fuels.

Now, the engineers at the University of Washington (UW) are hoping to change that. They have designed a concept for a fusion reactor, that when scaled up, would rival costs of fossil fuel plants with similar electrical outputs.

This from the University of Washington:

The design builds on existing technology and creates a magnetic field within a closed space to hold plasma in place long enough for fusion to occur, allowing the hot plasma to react and burn. The reactor itself would be largely self-sustaining, meaning it would continuously heat the plasma to maintain thermonuclear conditions. Heat generated from the reactor would heat up a coolant that is used to spin a turbine and generate electricity, similar to how a typical power reactor works.

Read the full article here.

Currently, the University of Washington’s concept is about one-tenth the size and power output of a final product, which would still be years away.

Does the future of energy interest you? Check out what our Energy Technology Division has to offer. And head over to our Digital Library to see what our scientists are researching in the field of energy storage and conversion.