Defects Actually Give Lithium-Ion Batteries a Boost

BatteryCapitalizing on tiny defects can improve electrodes for lithium-ion batteries, new research suggests.

In a study on lithium transport in battery cathodes, researchers found that a common cathode material for lithium-ion batteries, olivine lithium iron phosphate, releases or takes in lithium ions through a much larger surface area than previously thought.

“We know this material works very well but there’s still much debate about why,” says Ming Tang, an assistant professor of materials science and nanoengineering at Rice University. “In many aspects, this material isn’t supposed to be so good, but somehow it exceeds people’s expectations.”

Part of the reason, Tang says, comes from point defects—atoms misplaced in the crystal lattice—known as antisite defects. Such defects are impossible to completely eliminate in the fabrication process. As it turns out, he says, they make real-world electrode materials behave very differently from perfect crystals.

The findings, reported in a paper in Nature Communications, could potentially help manufacturers develop better lithium-ion batteries that power electronic devices worldwide.

Researchers collaborated with Department of Energy scientists at Brookhaven National Laboratory to use its powerful synchrotron light sources and observe in real time what happens inside the battery material when it is being charged. They also employed computer simulations to explain their observations.

One revelation, Tang says, was that microscopic defects in electrodes are a feature, not a bug.

“People usually think defects are a bad thing for battery materials, that they destroy properties and performance,” he says. “With the increasing amount of evidence, we realized that having a suitable amount of point defects can actually be a good thing.”

Inside a defect-free, perfect crystal lattice of a lithium iron phosphate cathode, lithium can only move in one direction, Tang says. Because of this, it is believed the lithium intercalation reaction can happen over only a fraction of the particle’s surface area.

But the team made a surprising discovery when analyzing X-ray microscopic images: The surface reaction takes place on the large side of his imperfect, synthesized microrods, which counters theoretical predictions that the sides would be inactive because they are parallel to the perceived movement of lithium.

The researchers explain that particle defects fundamentally change the electrode’s lithium transport properties and enable lithium to hop inside the cathode along more than one direction. That increases the reactive surface area and allows for more efficient exchange of lithium ions between the cathode and electrolyte.

Because the cathode in this study was made by a typical synthesis method, Tang says, the finding is highly relevant to practical applications.

“What we learned changes the thinking on how the shape of lithium iron phosphate particles should be optimized,” he says. “Assuming one-dimensional lithium movement, people tend to believe the ideal particle shape should be a thin plate because it reduces the distance lithium needs to travel in that direction and maximizes the reactive surface area at the same time. But as we now know that lithium can move in multiple directions, thanks to defects, the design criteria to maximize performance will certainly look quite different.”

The second surprising observation, Tang says, has to do with the movement of phase boundaries in the cathode as it is charged and discharged.

“When you take heat out of water, it turns into ice,” he says. “And when you take lithium out of these particles, it forms a different lithium-poor phase, like ice, that coexists with the initial lithium-rich phase.”

An interface, or a phase boundary, separates the phases. How fast the lithium can be extracted depends on how fast the phase boundary moves across a particle, he says.

Unlike in bulk materials, Tang explains, scientists had predicted that phase boundary movement in small battery particles could be limited by the surface reaction rate. The researchers were able to provide the first concrete evidence for this surface reaction-controlled mechanism, but with a twist.

“We see the phase boundary move in two different directions through two different mechanisms, either controlled by surface reaction or lithium bulk diffusion,” he says.

“This hybrid mechanism paints a more complicated picture about how phase transformation happens in battery materials. Because it can take place in a large group of electrode materials, this discovery is fundamental for understanding battery performance and highlights the importance of improving the surface reaction rate.”

The paper’s coauthors are from Rice University; Brookhaven National Laboratory, Massachusetts Institute of Technology; and the University of Wisconsin-Madison.

The US Department of Energy (DOE) Office of Basic Energy Science, the National Science Foundation (NSF), a University of Wisconsin-Madison WEI Seed Grant, and the Vilas Research Travel Awards supported the research. Researchers also conducted their work at the Department of Energy’s Brookhaven and Argonne national laboratories.

The Texas Advanced Computing Center at the University of Texas at Austin and the National Energy Research Scientific Computing Center funded by the DOE and the Big-Data Private-Cloud Research Cyberinfrastructure funded by the NSF and Rice University provided computing resources.


This article originally appeared on Futurity. Read the article.

Source: Rice University

Original Study DOI: 10.1038/s41467-017-01315-8

Related Post

Related Post

DISCLAIMER

All content provided in the ECS Redcat blog is for informational purposes only. The opinions and interests expressed here do not necessarily represent ECS's positions or views. ECS makes no representation or warranties about this blog or the accuracy or reliability of the blog. In addition, a link to an outside blog or website does not mean that ECS endorses that blog or website or has responsibility for its content or use.

Post Comments

Your email address will not be published. Required fields are marked *