212th ECS Meeting - Washington, DC

October 7 - October 12, 2007

PROGRAM INFORMATION
 

D4 - Modeling and Simulation of Dissolution and Corrosion Processes

Corrosion
 

Monday, October 8, 2007

Monroe Room East, Concourse Level

First-Principles Modeling

Co-Chair(s): R. G. Kelly and C. D. Taylor
TimeAbs#Title and Authors
10:30   943   First-Principles and Solid-State Modeling of the Hydriding of Uranium: Surface Adsorption to Phase Transformation C. D. Taylor and S. Lillard (Los Alamos National Laboratory)
11:00   944   DFT Study of the Role of Surface Defects in the Interaction of Cl- with Passive Films P. Marcus (CNRS-ENSCP-Ecole Nationale Supérieure de Chimie de Paris), A. Bouzoubaa, B. Diawara (ENSCP), C. Minot (UPMC) and V. Maurice (CNRS-ENSCP)
11:20   945   Oxygen Reduction at Thiol/Au(111) SAMs, Atomistic Modelling and Experiment P. Biedermann, E. Torres and A. Blumenau (Max-Planck-Institut fuer Eisenforschung)
11:40   946   First Principles Calculations of the Energetics of Hydrogen/Aluminum Interactions M. F. Francis, R. Kelly and M. Neurock (University of Virginia)
 

Dealloying Modeling

Co-Chair(s): R. C. Newman
TimeAbs#Title and Authors
14:00   947   Kinetic Monte Carlo Simulations of Porosity Evolution During Selective Dissolution From Ternary Alloys J. Erlebacher (Johns Hopkins University)
14:40   948   Relationship Between the Parting Limit for De-Alloying and a Particular High-Density Percolation Threshold D. Artymowicz (University of Toronto), J. Erlebacher (Johns Hopkins University) and R. C. Newman (University of Toronto)
15:00   949   Investigating the Role of the Electrolyte in the Microstructural Evolution of Electrochemically Dealloyed Metals Through Simulation and Coercion S. Policastro, R. G. Kelly and J. Carnahan (University of Virginia)
15:20 Intermission (20 Minutes)
 

Surface Oxide Modeling

Co-Chair(s): P. Marcus and E. McCafferty
TimeAbs#Title and Authors
15:40   950   Oxide Networks, Graph Theory, and the Passivity of Fe-Cr-Ni Ternary Alloys E. McCafferty (Consultant SAIC)
16:00   951   Modeling and Experiments on Nanoscale Oxidation and Corrosion Phenomena of Metals Under Photon Irradiation C. Chang and S. Ramanathan (Harvard University)
16:20   952   Concentration and Temperature Effects on ZnO Precipitation Kinetics J. Drake (The Procter & Gamble Company)
 

Tuesday, October 9, 2007

Monroe Room East, Concourse Level

Three-Dimensional FEM

Co-Chair(s): F. Preseul-Moreno
TimeAbs#Title and Authors
08:20   953   Computer Simulations for Cathodic Protection of Pipelines and Cathodic Delamination M. Orazem (University of Florida)
09:00   954   Galvanic Coupling Between Pure Copper and Pure Aluminum: Experimental Approach and Mathematical Model B. Tribollet (LISE - UPR 15 CNRS), J. Jorcin (CIRIMAT), C. Blanc (ENSIACET), N. Pébère (CIRIMAT) and V. Vivier (LISE - UPR 15 CNRS)
09:20   955   Experimental Investigation and Numerical Simulation of EIS for Corrosion Study of Reinforced Concrete M. Keddam (LISE - UPR 15 CNRS), R. Novoa (E.T.S.E.I.) and V. Vivier (LISE - UPR 15 CNRS)
10:00 Intermission (20 Minutes)
 

Crevice Corrosion

Co-Chair(s): B. Tribollet and R. Oltra
TimeAbs#Title and Authors
10:20   956   Modeling of Crevice Corrosion of Fe - Cr Alloys in Chloride Media M. Stroe, R. Oltra and B. Vuillemin (CNRS-Universite de Bourgogne)
10:40   957   Modeling of Crevice Corrosion of a NiCrMo Alloy Assuming Various Chemistries Along the Crevice Length F. J. Presuel (Florida Atlantic University), F. Bocher (University of Virginia), J. Scully (Center for Electrochemical Science and Engineering) and R. G. Kelly (University of Virginia)
11:00   958   Modeling the Ohmic Effects Due to Particulates and Surface Roughness Within Thin Electrolyte Films in Crevice Corrosion A. S. Agarwal, U. Landau, X. Shan and J. H. Payer (Case Western Reserve University)
11:20   959   Current Distribution on a Cathode Covered by a Thin Film Electrolyte in Crevice Corrosion - An Analytical Model A. S. Agarwal, U. Landau and J. H. Payer (Case Western Reserve University)
 

Corrosion Division Awards

Co-Chair(s): P. Schmuki
TimeAbs#Title and Authors
14:00   960   Surface Chemistry and Corrosion Processes (Uhlig Award Address) E. McCafferty (Consultant SAIC)
14:30 Abs # 827 (D1 - Corrosion General Session) - Vibrational Sum Frequency and Infrared Reflection/Absorption Spectroscopy Studies of the Air/Liquid and Liquid/Metal Interfaces (Cohen Award Address) C. M. Johnson (Royal Institute of Technology) (30 Minutes)
15:00 Intermission (20 Minutes)
 

Flow-Infuenced Electrochemical Modeling

Co-Chair(s): H. Terryn
TimeAbs#Title and Authors
15:20   961   Experimental Study and Modelling of Heat Transfer During Anodizing in a Wall-Jet Electrode Set-Up T. Aerts, G. Nelissen, J. Deconinck, I. De Graeve and H. A. Terryn (Vrije Universiteit Brussel)
15:40   962   Electrochemical Behavior of Dezincing-Resistant Brass Investigated by Channel Flow Double Electrode M. Itagaki, S. Ushida, I. Shitanda and K. Watanabe (Tokyo University of Science)
16:00   963   Modeling of Electroplating Processes K. Jain, W. Kuykendall (ESI US R&D), P. McHugh and G. Wilson (Semitool Inc.)
 

Conitnuum Kinetics Modeling

Co-Chair(s): M. E. Orazem
TimeAbs#Title and Authors
16:20   964   Modelling CO2 Corrosion in Confined Aqueous Environments: Cathodic Reactions and Global Kinetic Approach E. Remita (CNRS), B. Tribollet, V. Vivier (LISE - UPR 15 CNRS), E. Sutter (ENSCP), F. Ropital, J. Kittel (IFP), C. Taravel-Condat and N. Desamais (Technip)
16:40   965   A Practical Method to Accurately Predict the Atmospheric Pitting Corrosion of Aluminium Alloys A. Trueman and B. Hinton (DSTO)
17:00   966   EIS Studies of Copper Dissolution in Arginine and Hydrogen Peroxide N. Yerriboina, V. Venkatakrishnan and R. Srinivasan (IIT-Madras)
 

Exhibit Hall, Concourse Level

Poster Session

TimeAbs#Title and Authors
o   967   Influence of Additives on the Transpassive Dissolution of Ferritic Steels in Phosphoric Acid-Acetic Acid Electrolytes T. B. Tzvetkoff (University of Chemical Technology and Metallurgy), I. G. Betova (Technocal University of Sofia) and M. S. Bojinov (University of Chemical Technology and Metallurgy)
o   968   Stabilization of Etching Rate in FeCl2 for Fabrication of Cu Wire with Quality Engineering K. Shigyo, T. Taguchi and T. Hiroshima (Mitsubishi Electric Corporation)
o   969   Modeling of the Corrosion Process at the Alloy/Solution Interface by Electrochemical Methods M. Popa, E. Ec. Vasilescu, P. Drob, C. Vasilescu (Institute of Physical Chemistry) and J. Rosca (Las Palmas de Gran Canaria University)
o   970   Simulation of Coated Metal/Electrolyte System with Electric Equivalent Circuits M. Popa, P. Drob, E. Ec. Vasilescu, C. Vasilescu (Institute of Physical Chemistry), S. Drob (University of Bucharest) and J. Mirza Rosca (Las Palmas de Gran Canaria University)
o   971   Progress in Modeling Metastable Pitting of Stainless Steels Alloys B. Malki and B. Baroux (Universite de Grenoble)
o   972   A Lattice Gas Cellular Automata Simulation of the Intergranular Corrosion Propagation B. Malki and B. Baroux (Universite de Grenoble)