Honolulu PRiME 2012 - Honolulu, Hawaii

October 7 - October 12, 2012

PROGRAM INFORMATION
 

D1 - Corrosion General Poster Session

 

Wednesday, October 10, 2012

Kamehameha Exhibit Hall 3, Level 1, Hawaii Convention Center

D1 - Poster Session

Co-Chairs: S. Fujimoto
TimeProgr#Title and Authors
o   2095   Corrosion Protection of Steel by Conducting Polypyrrole Film Doped with Poly-acids of Mo and W M. Sasaki, A. Hyono, M. Ueda, and T. Ohtsuka (Hokkaido University)
o   2096   Corrosion under Water-Repellent Coating H. Saito (Kanazawa University)
o   2097   Monolayer and Bilayer Conducting Polymer Coatings for Corrosion Protection of Copper in Various Aggressive Media F. Branzoi (Institute of Physical Chemistry), V. Branzoi, and Z. Pahom (University of Politehnica Bucharest)
o   2098   Local Bond Structure of BaZrO3 Doped with Various Dopant Probed by Raman Spectroscopy D. Kim, E. Patrik, S. Miyoshi, T. Tsuchiya (The University of Tokyo), and S. Yamanguchi (The Unversity of Tokyo)
o   2099   Analysis of Nickel Electrodeposition Process by Using Quartz Crystal Microbalance M. Shiina, T. Tanabe, and K. Noda (Shibaura Institute of Technology)
o   2100   Analysis of Corrosion Behavior of Zn Thin Film by Using QCM R. Inoue, T. Tanabe, and K. Noda (Shibaura Institute of Technology)
o   2101   Passivation of AA5083 Aluminium Alloy by Anodic Pre-Treatments in Ionic Liquids P. Huang, P. Howlett (Deakin University), D. MacFarlane (Monash University), and M. Forsyth (Deakin University)
o   2102   Passivity and Local Activation of Aluminum in Borate Buffer Solution under Action of Bromide-Ions Additives A. Chikova, T. A. Minakova, and S. A. Kaluzhina (Voronezh State University)
o   2103   Material Performance of Alloys in NaNO3/KNO3 at 600°C A. M. Kruizenga and D. Gill (Sandia National Laboratories)
o   2104   Determination of Current Efficiency of Anodic Film Formation in the Molten Melt by ICP-AES S. Han (Korea Institute of Industrial Technology) and H. Kim (KITECH)
o   2105   Electron Beam Induced Texture Change of the Anodic Films Formed in the Molten Melt S. Han and H. Kim (Korea Institute of Industrial Technology)
o   2106   Evaluation of Zinc Rich Paint (ZRP) Efficiency on Mild Steel in Seashore Environment A. H. Sofian and K. Noda (Shibaura Institute of Technology)
o   2107   Evaluation of Degradation of High Performance Organic Coatings under Outdoor Salt Spray Test D. Ito (Yokohama National University), Y. Akira (Port and Airport Research Institute), Y. Miyata, T. Yokoyama, and S. Okazaki (Yokohama National University)
o   2108   A Novel Nanomaterial Hybrid Corrosion Resistant Coating for Marine Applications V. Kamavaram, G. Arumugam, V. Veedu, and K. Cheung (Oceanit Laboratories Inc)
o   2109   Electrochemical and Microstructural Characterization of Cr(VI) Free Passivation Layers Applied on Electrogalvanized Steel V. E. Hernandez, M. P. Segundo (University of São Paulo), C. R. Tomachuk (Nuclear and Energetic Research Institute), and H. G. De Melo (University of Mons)
o   2110   Evaluation of Corrosion Protection of Zinc Rich Paint Coated Steel A. Tanaka, A. H. Sofian, and K. Noda (Shibaura Institute of Technology)
o   2111   Evaluation of Corrosion Protection Property on Galvanized Steels in Atmospheric Environment K. Ito and K. Noda (Shibaura Institute of Technology)
o   2112   Effect of Alloy Element in Low Alloy Steels on Corrosion Behavior A. Sunahara, T. Ohmori, K. Noda (Shibaura Institute of Technology), H. Katayama, and H. Masuda (National Institute for Materials Science)
o   2113   Potential Measurement of High Corrosion Resistance Metals Surface in Atmospheric Environment Y. Hirohata, K. Noda (Shibaura Institute of Technology), H. Katayama, and H. Masuda (National Institute for Materials Science)
o   2114   Corrosion Inhibition of Carbon Steel in Cooling Water Systems by New Organic Polymers as Green Inhibitors F. Branzoi (Institute of Physical Chemistry), V. Branzoi (University of Politehnica Bucharest), M. Iordoc (ICPE-Advanced Researches), and Z. Pahom (University of Politehnica Bucharest)
o   2115   In Situ Electrochemical Detection of Molybdate in an Absorption Refrigerator Y. Hitoshi, Y. Hatakeyama (Iwate University), H. Inabe, K. Sekiguchi (Hitachi Building Systems Co., Ltd.), T. Hishinuma, M. Itoh, and N. Ohnaka (Hitachi Kyowa Engineering Co., Ltd)
o   2116   Sodium Nitrite-Based Corrosion Inhibitor for Reinforcing Steel in Simulated Concrete Pore Solutions R. Du, Y. Guo, Y. Zhu, W. Chen, X. Wang, and C. Lin (Xiamen University)
o   2117   Effect of Stress on Oxide Film Growth on SUS 316L Stainless Steel under High Pressure-High Temperature Water Y. Hamaguchi and T. Ohtsuka (Hokkaido University)
o   2118   The effect on Impurities of the Properties of Passive Oxides on Stainless Steels M. Abe, A. Hyono, M. Ueda, T. Ohtsuka (Hokkaido University), and T. Ishii (JFE Steel Co.)
o   2119   Synthesis and Characterization of Modified Nano-TiO2 Films for Corrosion Protection of Stainless Steel Y. Zhu, J. Zhang, R. Du, H. Qi, L. Xu, and C. Lin (Xiamen University)
o   2120   Effects of Tritiated Water on Passivation Behavior of SUS304 Stainless Steel M. Oyaidzu, K. Isobe, and T. Yamanishi (Japan Atomic Energy Agency)
o   2121   Localized Corrosion Behavior of Austenitic Stainless Steel Containing Martensitic Phases in NaCl Solution S. Abe (Shibaura Institute of Technology), T. Saito (Osaka University), K. Noda (Shibaura Institute of Technology), and Y. Watanabe (Nagoya Institute of Technology)
o   2122   Analysis of Localized Corrosion Behavior of Stainless Steel in Atmospheric Environment Y. Nakajima (Shibaura Institute of Technology), T. Saito (Osaka University), and K. Noda (Shibaura Institute of Technology)
o   2123   Analysis of Passivation Behavior of Stainless Steel in Na2SO4 Solutions A. Moriyasu (Shibaura Institute of Technology), T. Saito (Osaka University), and K. Noda (Shibaura Institute of Technology)
o   2124   Low Temperature Deposition of SiO2 Matrix onto the Surface of Stainless Steel as Protective Coating T. M. Abdel-Fattah (Christopher Newport University) and H. Elsayed-Ali (Old Dominion University)
o   2125   The Electrochemical Properties of the Main Constituent Phases in Magnesium Alloys Y. Chou, H. Yang, S. Pan, S. Chung, and W. Tsai (National Cheng Kung University)
o   2126   Corrosion Resistance of Mg(OH2/Mg-Al LDH Film Formed on Magnesium alloy by Steam Coating Method T. Ishziaki (Shibaura Institute of Technology) and K. Teshima (Shinshu University)
o   2127   Characterization of a New Polypropylene+Graphite+Zinc Ternary Composite J. Agrisuelas, J. García-Jareño, M. Llop, M. Piedras, and F. Vicente (University of Valencia)
o   2128   Non-Destructive Evaluation for Corroded Metal Surface Using Terahertz Wave H. Kariya, A. Sato, T. Tanabe, K. Saito (Tohoku University), K. Nishihara, A. Taniyama (Sumitomo Metals Co., Ltd.), and Y. Oyama (Tohoku University)
o   2129   The Influences of Roughness of Ti Substrate and Thickness of IrO2 Intermediate Layer on Oxygen Evolution Anode Performance in Seawater Electrolysis Z. Kato (Tohoku Institute of Technology), K. Izumiya, N. Kumagai (Daiki Ataka Engineering Co. Ltd.,), and K. Hashimoto (Tohoku Institute of Technology)
o   2130   Electrochemical Impedance Spectroscopy to Characterize Different Materials in Soybean Biodiesel Medium A. H. Akita, C. Fugivara (Instituto de Química - Univ. Estadual Paulista - UNESP), I. Aoki (Escola Politécnica - Univ. de São Paulo - USP), and A. Benedetti (Instituto de Química - Univ. Estadual Paulista - UNESP)
o   2131   Graphite Layer on Metal Plates for PEMFC Applications W. Wang and C. Lan (Industrial Technology Research Institute)
o   2132   Surface Morphology Changes during Dealloying F. U. Renner, G. Ankah, and A. Pareek (Max-Planck-Institut für Eisenforschung)
o   2133   Using LEIS to Evaluate Local Electrochemical Activity of Al 7475 T761/Cu Model Electrodes J. Ferrari (University of São Paulo), H. G. De Melo (University of Mons), N. Pébère (CIRIMAT UMR CNRS), B. Tribollet, and V. Vivier (CNRS)
o   2134   Triboelectrochemical Characterization of Copper Surface S. Joo and H. Liang (Texas A&M University)
o   2135   Application to Non-Destructive Inspection of Copper Corrosion via Coherent Terahertz Light Sources K. Saito, T. Yamagata, H. Kariya, T. Tanabe, and Y. Oyama (Tohoku University)
o   2136   Effect of Alloying Elements on Corrosion Behavior of Zr-Based Binary Alloys in Simulated Body Fluid Y. Tsutsumi, S. Yalatu, S. Migita, H. Doi, N. Nomura (Tokyo Medical and Dental University), K. Noda (Shibaura Institute of Technology), and T. Hanawa (Tokyo Medical and Dental University)
o   2137   Corrosion Behavior of Nanocrystalline Hydroxyapatite Coating on New Ti Alloy Surface in Ringer Solution M. Popa, J. Calderon Moreno, C. Vasilescu, and S. Drob (Institute of Physical Chemistry "Ilie Murgulescu")
o   2138   Corrosion Study of Ni-Ti Orthodontic Archwires: An In Vitro Study K. M. Britto, D. A. Macedo, R. M. Nascimento, A. E. Martinelli, and H. S. Júnior (Federal University of Rio Grande do Norte)
o   2139   A Three-Electrode Implantable Micro-Chip for Obtaining Real Time Corrosion Rates during Small Animal Testing B. A. Shaw, E. Sikora, M. W. Horn, H. A. Basantani, A. Hartsock, D. R. Cook, B. J. Gluckman, and B. A. Bimber (The Pennsylvania State University)
o   2140   In Vitro Galvanic Corrosion of Metallic Biomaterials N. Shida, S. Miyabe, and S. Fujimoto (Osaka University)
o   2141   Analysis of Electrochemical Impedance Spectroscopy Results and Ion Release In Vitro of Si+ Ion Implanted Medical 316 LVM Steel J. C. Galván (Centro Nacional de Investigaciones Metalúrgicas), M. Larrea, M. Multigner (CENIM - CSIC), I. Braceras (Inasmet-Tecnalia), L. Saldaña, N. Vilaboa (Unidad de Investigación, Hospital Universitario La Paz), and J. González-Carrasco (CENIM - CSIC)
o   2142   Electrochemical Behavior of Ti-6Al-7Nb in Simulated Physiological Body Fluid Environment N. A. Al-Mobarak, A. Al-Swayih (Princess Nora Bint Abdul Rahman University), and F. Al-Rashoud (AlKharge University)
o   2143   Evaluation of Corrosion Resistance of Co-Cr Alloy in NaCl Solution R. Suzuki, K. Noda (Shibaura Institute of Technology), Y. Tsutsumi, and T. Hanawa (Tokyo Medical and Dental University)