Honolulu PRiME 2012 - Honolulu, Hawaii

October 7 - October 12, 2012



D5 - High Temperature Corrosion Materials Chemistry 10


Monday, October 8, 2012

318A, Level 3, Hawaii Convention Center

Solid Oxide Fuel Cells

Co-Chairs: E. Opila, S. Yamaguchi
TimeProgr#Title and Authors
08:00   2291   In Situ Optical Studies of Electrochemically Induced Anode Degradation in High Temperature Solid Oxide Fuel Cells R. A. Walker, J. D. Kirtley, D. M. Halat, and M. McIntyre (Montana State University)
08:40   2292   Mechanical Properties of Ni-YSZ Cermets under Simulated Environment of Redox Cycling T. Miyasaka, S. Sukino, S. Watanabe, T. Kawada, K. Sato, and T. Hashida (Tohoku University)
09:00   2293   Improved Sintering Property of Y-Doped BaZrO3 by Mn Addition D. Kim, E. Patrik, S. Miyoshi, T. Tsuchiya, and S. Yamaguchi (The University of Tokyo)
09:20   2294   Non-Linear Doping effect on the Electrochemical Properties of BaZr1-xPrxO3 M. Tamaru, S. Miyoshi, D. Kim (The University of Tokyo), T. Higuchi (Science University of Tokyo), Y. Oyama, and S. Yamaguchi (The University of Tokyo)
09:40 Intermission (20 Minutes)
10:00   2295   Study on Electrode Reaction of Perovskite Oxide Electrodes on a Proton Conducting Electrolyte K. Suzuki, S. Hashimoto, K. Amezawa, and T. Kawada (Tohoku University)
10:20   2296   Mechano-Electrochemical effect on Materials Property of Ion Conducting Oxides K. Yashiro, Y. Kawamura, S. Nakakawaji, K. Sato, K. Amezawa, and J. Mizusaki (Tohoku University)
10:40   2297   Chemical Stability of Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF) F. Wang, K. Yashiro, K. Amezawa, and J. Mizusaki (Tohoku University)
11:00   2298   A Study of Nickel-Substituted Lanthanum Cobaltite as Cathode Materials for SOFCs Y. Uzumaki, S. Hashimoto, K. Amezawa, and T. Kawada (Tohoku University)
11:20   2299   La/Sr-Co Perovskite-Based Multi-Layered Super Cathode Fabricated by Sputtering Method A. Takeshita, S. Miyoshi, and S. Yamaguchi (The University of Tokyo)
11:40   2300   Oxygen Transport in Perovskite Type Oxide La0.6Sr0.4Co0.2Fe0.8O3-δ H. Kudo, K. Yashiro, S. Hashimoto, K. Amezawa, T. Kawada, and J. Mizusaki (Tohoku University)

High Temperature Chemistry of Carbides, Borides, and Nitrides

Co-Chairs: E. Wuchina, T. Markus
TimeProgr#Title and Authors
14:00   2301   Influence of Phase Crystallography on Precipitation Microstructures and Deformation Mechanisms in Tantalum Carbides G. B. Thompson, R. A. Morris, N. De Leon, B. Wang (The University of Alabama), and C. Weinberger (Sanda National Laboratories)
14:40   2302   Preparation and Characterization of Materials in the Ta-Hf-C System J. A. Zaykoski, M. M. Opeka, and I. Talmy (Naval Surface Warfare Center)
15:00   2303   Variability in Oxidation Resistance of ZrB2-SiC K. N. Shugart and E. J. Opila (University of Virginia)
15:20   2304   Effect of Silicon Addition on the Oxidation Kinetic and on the Structure of the Oxide Layer Formed on Transition Metal Nitride Coatings J. Pierson (Université de Lorraine), P. Steyer (INSA de Lyon), A. Mège-Revil (Ecole Centrale de Lille), and D. Pilloud (Université de Lorraine)
15:40   2305   Oxidation of Cr2AlC between 700 and 1300°C in Air S. Kim, S. Bong, and D. Lee (Sungkyunkwan University)

Tuesday, October 9, 2012

318A, Level 3, Hawaii Convention Center

Oxidation and Corrosion of Metallic Systems -1

Co-Chairs: P. Gannon, T. Maruyama
TimeProgr#Title and Authors
08:00   2306   Fabrication of Vertically Aligned Nano-Oxide Arrays via Internal Oxidation of Dilute Alloys M. Nanko and D. T. Do (Nagaoka University of Technology)
08:40   2307   High-Temperature Oxidation Kinetics for Recovery of Mechanical Strength on Nano-Ni Dispersed Al2O3 Hybrid Materials D. Maruoka and M. Nanko (Nagaoka University of Technology)
09:00   2308   Early Oxidation Stages of Alumina Formers and the effect of the Additions: A Brief Survey J. Jedliński (AGH University of Science and Technology)
09:20   2309   The Influence of KCl(s) on the Oxidation of a FeCrAl Alloy at 600 °C in Dry and Wet Environment N. Israelsson, L. Johansson, and J. Svensson (Chalmers University of Technology)
09:40 Intermission (20 Minutes)
10:00   2310   Deposit-Induced Corrosion of Nickel-Base Alloys at Low Temperatures (650-750˚C) B. S. Lutz, M. N. Task, N. M. Yanar, F. S. Pettit (University of Pittsburgh), G. R. Holcomb (National Energy Technology Laboratory), and G. H. Meier (University of Pittsburgh)
10:20   2311   High-Temperature Corrosion Behavior of Sputtered Ni-Based Nanocrystalline Coating with Yttrium Addition in Chloride at 900°C P. Yu (Shenyang University of Chemical Technology), W. Wang, F. Wang, and S. Zhu (Chinese Academy of Sciences)
10:40   2312   Accelerated Corrosion of Low Alloy and Stainless Steel by PbCl2-Containing Salt Mixtures D. P. Bankiewicz, P. Yrjas, and M. Hupa (Åbo Akademi University)
11:00   2313   An Electrochemical Impedance Spectroscopy Study on the effect of Condensate on Oxides Formed on a 25Cr/20Ni Cast Stainless Steel in Exhaust Environments M. Ekström (Royal Institute of Technology), B. Zhu (Materials Technology, Scania CV AB), P. Szakalos, and S. Jonsson (Royal Institute of Technology)
11:20   2314   The effect of Water Vapor on the Distribution of Oxide Precipitates during Internal Oxidation of Ni-5Cr Alloy at 1073 K M. Ueda (Tokyo Institute of Technology), Y. Kurata (NGK Insulators Ltd.), K. Kawamura, and T. Maruyama (Tokyo Institute of Technology)
11:40   2315   Oxidation Behaviour of Sanicro 25 in CO2 and H2O-Rich Environments L. Intiso (Centro sviluppo Materiali), L. Johansson, and M. Halvarsson (Chalmers University of Technology)

Oxidation and Corrosion of Metallic Systems -2

Co-Chairs: P. Masset, G. Meier
TimeProgr#Title and Authors
14:00   2316   Behaviors of SOFC Interconnect Steels and Coatings with Contacting Electrodes and Seals in Single and Dual Atmosphere Exposures R. Amendola, A. Weinstein, S. Sofie, and P. Gannon (Montana State University)
14:20   2317   Oxygen Activity Distribution from Atmosphere to Scale Surface on High Temperature Oxidation of Iron K. Kawamura, S. Sonota, M. Ueda, and T. Maruyama (Tokyo Institute of Technology)
14:40   2318   Kinetics and Mechanisms of Copper Catastrophic Oxidation in the Presence of Low-Melting Oxides V. V. Belousov (Russian Academy of Sciences)
15:00 Intermission (20 Minutes)

High Temperature Electrochemistry

Co-Chairs: G. Meier, P. Masset
TimeProgr#Title and Authors
15:20   2319   The Activity of Rh2O3 in Boro-Silicate Glass at 1373 K H. Kimura, S. Yamamoto, M. Ueda, K. Kawamura, T. Maruyama (Tokyo Institute of Technology), K. Minami, and E. Ochi (Japan Nuclear Fuel Limited)
15:40   2320   High Temperature Electrolysis for Liquid Iron Production G. Haarberg, E. Kvalheim (Norwegian University of Science and Technology), A. Martinez, S. Rolseth, and H. Gudbrandsen (SINTEF)
16:00   2321   Corrosion Behavior of Construction Materials for Intermediate Temperature Steam Electrolysers A. V. Nikiforov (Technical University of Denmark), I. M. Petrushina (Technical Iniversity of Denmark), J. Jensen, and N. Bjerrum (Technical University of Denmark)
16:20   2322   Evaluation of Electrode Materials for Electrolytic Reduction of Nuclear Fuels A. Merwin and D. Chidambaram (University of Nevada Reno)

Kamehameha Exhibit Hall 3, Level 1, Hawaii Convention Center

D5 - Poster Session

Co-Chairs: E. Opila, J. Fergus
TimeProgr#Title and Authors
o   2323   Fabrication of Nano-Rod Array Structure Used Aluminizing and Internal Oxidation of Alloy for Micro-Channel T. Ishizaki, D. T. Do, and M. Nanko (Nagaoka University of Technology)
o   2324   Measuring Cr Volatility from Ferritic Stainless Steels: Novel and Conventional Methods Compared J. J. Eziashi, C. Key, R. Smith, and P. Gannon (Montana State University)

Wednesday, October 10, 2012

318A, Level 3, Hawaii Convention Center

Thermodynamic/Kinetic Modeling and Experiment

Co-Chairs: J. Fergus, E. Opila
TimeProgr#Title and Authors
08:20   2325   Thermodynamic Modeling of Chromate Salt Mixtures in High-Temperature Corrosion of Superheater Materials D. K. Lindberg, J. Lehmusto, and M. Hupa (Åbo Akademi University)
08:40   2326   Investigation of the effect the Polarisability of Dipoles on the Local Microstructures of Molten Slags Using Density Functional Theory Molecular Dynamics A. A. Gray-Weale (University of Melbourne), J. Krahl, A. Jacob (TU Freiberg), and P. J. Masset (ATZ Entwicklungszentrum)
09:00   2327   Thermodynamic Modeling for Liquid Phase Sintering and Joining of Silicon Carbide H. J. Seifert (Karlsruhe Institute of Technology)
09:40 Intermission (20 Minutes)
10:00   2328   Multiscale Analysis on Gas Phase and Surface Chemistry of SiC-CVD Process Y. Fukushima (The University of Tokyo), K. Hotozuka (IHI Corporation), Y. Funato, N. Sato, T. Momose, and Y. Shimogaki (The University of Tokyo)
10:20   2329   Study of La2Zr2O7 and La2Hf2O7 Melting by Thermal Analysis and X-ray Diffraction S. V. Ushakov, P. Saradhi, A. Navrotsky (University of California at Davis), R. J. Weber, and C. J. Benmore (Argonne National Laboratory)
10:40   2330   In Situ Investigation of a High Temperature Phase Transformation Using Laser Heating and Synchrotron Diffraction P. Saradhi, S. V. Ushakov, A. Navrotsky (University of California at Davis), R. J. Weber, and C. J. Benmore (Argonne National Laboratory)
11:00   2331   Hydration and Dehydration Behavior of Amorphous Tantalum Oxide with Various Oxygen Contents T. Ozato, T. Tsuchiya, S. Miyoshi, and S. Yamaguchi (The University of Tokyo)
11:20   2332   Determination of Vapor Pressures of Fe-Oxides in Humid Atmospheres T. Markus, W. Quadakkers, and L. Singheiser (Forschungszentrum Jülich GmbH)
11:40   2333   Reaction Syntheses with Carbon Materials Chemistry: Intragranular Nanocomposites and 'Carbon Copies' D. W. Lipke (Air Force Research Laboratory) and K. H. Sandhage (Georgia Institute of Technology)

High Temperature Coatings

Co-Chairs: T. Markus, E. Wuchina
TimeProgr#Title and Authors
14:00   2334   Thermochemical Interactions of Rare Earth Based TBCs with Molten CMAS Deposits E. M. Zaleski, C. Ensslen, and C. G. Levi (University of California, Santa Barbara)
14:20   2335   Ceramic Dusting Corrosion of Yttria Stabilized Zirconia in Ultra-High Temperature Reverse-Flow Pyrolysis Reactors C. Chun, S. Desai (ExxonMobil Corporate Strategic Research), and T. A. Ramanarayanan (Princeton University)
14:40   2336   Chemical Densification of Oxide Based Coatings for High Temperature Wear and Corrosion Resistance P. J. Masset, M. Faulstich (ATZ Entwicklungszentrum), K. Fehr (Ludwig-Maximilians-Universität München), C. Weih, G. Wolf (ATZ Entwicklungszentrum), and Y. Ye (Ludwig-Maximilians-Universität München)
15:00   2337   Relationship between Electrical Properties and Stress Field in Solid Electrolyte Thin Films F. Iguchi, Y. Osawa, and H. Yugami (Tohoku University)
15:20   2338   Oxygen Gas Sealing between YSZ and Fe-Cr Alloy by Liquid-Phase-Oxidation Joining via ZrO2-Dispersed Al Interlayer Y. Hashimoto and T. Akashi (Hosei University)
15:40 Intermission (20 Minutes)
16:00   2339   Microstructures and Phase Evolution in NiAl-Based Overlay Coatings M. L. Weaver and J. P. Alfano (The University of Alabama)
16:20   2340   Transition Metal Spinel Oxide Coatings for Solid Oxide Fuel Cell Interconnects J. W. Fergus, C. Dileep Kumar, Y. Liu, W. Tilson, A. Dekich, and H. Wang (Auburn University)
16:40   2341   Microstructural Investigation of Co- and RE-Nanocoatings on FeCr Steels S. Canovic, J. Froitzheim, R. Sachitanand, M. Nikumaa, L. Johansson, and J. Svensson (Chalmers University of Technology)
17:00   2342   Protection of Ferritic Steels by Nano-Structured Coatings: Supercritical Steam Turbines Applications M. Mato, M. Hierro, S. Castañeda, G. Alcalá, I. Lasanta, M. Tejero (Universidad Complutense de Madrid), J. Sánchez (CSIC), M. Brizuela (TECNALIA-Inasmet), and F. J. Pérez (Universidad Complutense de Madrid)
17:20   2343   Improvement of the Resistance of Titanium Aluminides to Environmental Embrittlement P. J. Masset (ATZ Entwicklungszentrum), F. Bleicher (TU Wien), L. Bortolotto (Dechema Forschungsinstitut), G. Geiger (TU Wien), A. Kolitsch (Helmholtz-Zentrum Dresden-Rossendorf), C. Langlade (TU Belfort-Montbéliard), J. Paul (Helmholtz-Zentrum-Geestacht), B. Pelic (TU Freiberg), F. Pyczak (Helmholtz-Zentrum-Geestacht), D. Rafaja (TU Freiberg), P. Schumacher (Österreichisches Gießerei-Institut), M. Schütze (Dechema Forschungsinstitut), G. Wolf (ATZ Entwicklungszentrum), and R. Yankov (Helmholtz-Zentrum Dresden-Rossendorf)