Honolulu PRiME 2012 - Honolulu, Hawaii

October 7 - October 12, 2012



D6 - Light Alloys 4


Wednesday, October 10, 2012

319A, Level 3, Hawaii Convention Center

Co-Chairs: B. Shaw and R. Buchheit
TimeProgr#Title and Authors
08:20   2344   High Resolution SEM Investigation of Intercrystalline Corrosion on 6000-Series Aluminum Alloy with Low Copper Content K. Shimizu (Keio University) and K. Nisancioglu (Norwegian University of Science and Technology)
08:40   2345   Effect of Additive Elements on Corrosion Behavior for Aluminum in Weak Alkaline Solution at High Temperature Y. Honkawa, T. Yaegashi, and Y. Kojima (Furukawa-Sky Aluminum Corp.)
09:00   2346   Combined Role of Trace Elements Pb and Sn in Low Temperature Activation of Aluminum K. Kurt, J. C. Walmsley (Norwegian University of Science and Technology), S. Diplas (SINTEF), and K. Nisancioglu (Norwegian University of Science and Technology)
09:20   2347  
Interactions of Sulfide with Aluminum Alloys J. S. Lee, R. Ray, and B. Little (Naval Research Laboratory)
09:40   2348   The Role of Environmental Aspects and Atmospheric Contaminants on the Corrosion of 2024, 6061 and 7075 Aluminum Alloys Y. Yoon and D. C. Hansen (University of Dayton Research Institute)
Co-Chairs: S. Virtanen and S. Fujimoto
TimeProgr#Title and Authors
10:20   2349   Pitting Corrosion of Aluminum Alloy in Chloride Environment Y. Oya and Y. Kojima (Furukawa-Sky Aluminum Corp.)
10:40   2350   Effect of Surface Topography, Cleaning, and Conversion Coatings in the Adhesion Strength of Organic Polymers to AA2024-T3 using the Blister Test B. C. Rincon Troconis and G. Frankel (The Ohio State University)
11:00   2351   Self-Healing Nature of Molybdate Conversion Coatings for Aluminum Alloys D. Rodriguez, R. Misra, and D. Chidambaram (University of Nevada Reno)
11:20   2352   Organic-Inorganic Sol-Gel Coatings Modified with TiO2 Nanoparticles for Corrosion Protection of a Powder Metallurgical Aluminum Alloy A. Jiménez-Morales, F. García-Galván, D. Carbonell, D. Montoya (Universidad Carlos III de Madrid), and J. C. Galván (Centro Nacional de Investigaciones Metalúrgicas)
11:40   2353   The Role of Environmental and Atmospheric Conditions on the Corrosion of AA 2024-T3 with Various Pre-Treatments and Coating Systems L. Petry (University of Dayton Reearch Institute) and D. C. Hansen (University of Dayton Research Institute)
Co-Chairs: K. Nisancioglu and Y. Kojima
TimeProgr#Title and Authors
14:00   2354   Corrosion Control Studies of Aluminum-Composite Interfaces in Diverse Micro-Climates R. Srinivasan and L. H. Hihara (University of Hawaii)
14:20   2355   Metal Dissolution and Repassivation Behavior of Ti6Al4V Alloy during Rapid Straining in Simulated Body Fluid K. Doi, S. Miyabe, and S. Fujimoto (Osaka University)
14:40   2356   Investigation of the Corrosion of Magnesium and Titanium in Simulated Body Fluids R. Feser, M. Ceylan (University of Applied Sciences South Westfalia), and S. Virtanen (University of Erlangen)
15:00   2357   Magnesium and Mg Alloys "Biocorrosion" in Protein Containing Body Fluids P. Schmutz (EMPA Swiss Federal Laboratories for Materials Science and Technology), N. Ott, R. Grisch (EMPA), and P. Uggowitzer (ETHZ, Swiss Federal Institute of Technology)
15:20   2358   Influence of Chemistry, Microstructure and Texture on the Durability of Mg-Alloys: An overview K. Gusieva, C. H. Davis, and N. Birbilis (Monash University)
Co-Chairs: D. Hansen and N. Birbilis
TimeProgr#Title and Authors
16:00   2359   A Cumulative Approach to Tracking the Corrosion of Mg Alloys on the Microscale R. M. Asmussen, P. Jakupi, and D. W. Shoesmith (University of Western Ontario)
16:20   2360   Local, Time-Resolved and Element-Specific Investigations of Corrosion Processes for the Development of Biodegradable Mg Alloys N. Ott (EMPA), P. Schmutz (EMPA Swiss Federal Laboratories for Materials Science and Technology), C. Ludwig, and A. Ulrich (EMPA)
16:40   2361   Improvement in Corrosion Characteristics of AZ31 Mg Alloy by Square Pulse Anodizing between Transpassive and Active Regions Y. Choi, S. Salman, K. Kuroda, and M. Okido (Nagoya University)
17:00   2362   The Development of Ionic Liquid Generated Conversion Coatings for Magnesium Alloys P. Howlett (Deakin University), J. Latham, D. MacFarlane (Monash University), and M. Forsyth (Deakin University)
17:20   2363   Corrosion Inhibition of Mg Alloys by Inorganic and Organic Inhibitors J. Hu, D. Huang (Huazhong University of Science and Technology), G. Song (GM Global R&D), and X. Guo (Huazhong University of Science and Technology)
17:40   2364   Biocompatible Coatings for Mg Alloys for Tailored Degradation Behavior S. Virtanen (University of Erlangen)